ASTM F588-04
Historical Standard: ASTM F588-04 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
SUPERSEDED (see Active link, below)
ASTM F588
1. Scope
1.1 These test methods determine the ability of window assemblies of various types to restrain, delay, or frustrate forced entry.
1.2 For purposes of these test methods, window assemblies are defined as described in and as shown in . Window assemblies with a combination of operable sash and fixed panes (lites) shall be classified and tested separately for each type.
1.2.1 Type AA window assembly which incorporates one or more sash that open by sliding , either vertically or horizontally within the plane of the wall.
1.2.2 Type BA window assembly which incorporates one or more sash that are hinged at or near two corners of the sash and that open toward the exterior (outswinging) or toward the interior (inswinging).
1.2.3 Type CA window assembly which incorporates one or more sash that are pivoted so that part of the sash opens toward the interior and part of it opens toward the exterior.
1.2.4 Type DA window assembly which incorporates one or more fixed panes (lites) or stationary sash that are designed not to open.
Note 1See for graphic depiction of window assembly types.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
E631 Terminology of Building Constructions
F1233 Test Method for Security Glazing Materials And Systems
AAMA Standard
AAMA1302.5-76 Voluntary Specifications for Forced Entry Resistant Aluminum Prime WindowsCAWM Standards
CMBSO1-79 California Model Building Security OrdinanceKeywords
fenestration; forced entry resistance; laboratory method; windows;
ICS Code
ICS Number Code 13.310 (Protection against crime); 91.060.50 (Doors and windows)
DOI: 10.1520/F0588-04
ASTM International is a member of CrossRef.
