|
-
ASTM
F3548-21 Standard Specification for UAS Traffic Management (UTM) UAS Service Supplier (USS) Interoperability
Edition: 2021
$129.60
Unlimited Users per year
Description of ASTM-F3548 2021
ASTM F3548-21
Active Standard: Standard Specification for UAS Traffic Management (UTM) UAS Service Supplier (USS) Interoperability
ASTM F3548
Scope
1.1 This specification is intended to be a global specification providing components that may be used to satisfy requirements expected to be common to many
UTM-related regulations. This specification is not intended to comprehensively address all aspects of any particular UTM-related regulation or concept of operations. Similarly, because varying
terminology for the same concept is frequently used across different regulations, readers should not expect an exact terminology consistency with any particular UTM-related regulation.
1.2 This version of the specification is focused on strategic aspects of UAS operations, including strategic conflict detection, aggregate conformance of
operations to their operational intents, constraint awareness, and situational awareness in the event of nonconforming or contingent operations. The intention is that this specification will
evolve to address increasingly complex strategic aspects of UAS operations and potentially certain tactical aspects of UAS operations.
1.3 This specification addresses the performance and interoperability requirements, including associated application programming interfaces (APIs), for a
set of UTM roles performed by UAS Service Suppliers (USSs) in support of UAS operations. Roles are groupings of one
or more related UTM services. A competent authority may choose to use the roles defined in this specification in establishing the granularity of authorizations granted to a USS. The roles
defined in this specification are:
(1) Strategic Coordination, comprising the Strategic Conflict Detection and Aggregate Operational Intent Conformance Monitoring services;
(2) Conformance Monitoring for Situational Awareness (CMSA);
(3) Constraint Management, comprising the Constraint Management service; and
(4) Constraint Processing, comprising the Constraint Processing service.
1.4 Section 4, Conceptual Overview, provides a description of each of the services and roles and includes further
discussion on their scope.
1.5 A regulator may choose to require that a USS support a minimum or prescribed set of roles and services and may adopt terminology other than USS for a
software system that provides something other than that minimum or prescribed set of roles and services. However, for purposes of this specification, a USS is a system that provides one or more
of the UTM services defined in this specification.
1.6 A USS is not required by this specification to perform all roles or implement all defined services, providing business case flexibility for
implementers. A typical USS that supports operators in the planning and execution of UAS operations may implement the Strategic Coordination, Constraint Processing, and CMSA roles. (Note that a
USS providing CMSA for a UAS operation is required to also provide Strategic Coordination for the operation.) However, other implementations more limited in scope are possible. For example, a
USS may implement only the Constraint Management role and be intended for use only by authorized constraint providers; or, a USS may implement only the Constraint Processing role to provide
general airspace awareness to users independent of planning UAS flights. USSs may also provide additional, value-added capabilities and still be compliant with this specification as long as the
value-added capabilities do not conflict with the services defined in this specification, and the implementation of services defined in this specification conforms to the applicable
requirements.
1.7 A USS may also support other UTM roles such as Remote ID and airspace access (for example, the FAA’s LAANC), specified in other documents.
1.8 This specification addresses aspects common to all roles and services, such as Discovery and Synchronization Services (DSS), security, auditing, and
handling of off-nominal cases (for example, USS or DSS failures).
1.9 Additional services or enhancements to the current services will be added to subsequent versions of this specification. Appendix X2, Future Work Items, identifies a set of these items.
1.10 The safety case for this version of the specification, summarized in Appendix X4, is limited to strategic
deconfliction, which is accomplished using the services provided by the Strategic Coordination role. This analysis does not constitute a full safety case for any particular operator or set of
operations, which will have their own unique factors and variables. It does help operators understand, however, the contribution of using strategic deconfliction to their safety case and what
the key variables are in increasing or decreasing the contribution. Using assumptions similar to those documented in Appendix X4, strategic deconfliction
reduces the probability of midair collisions by approximately two to three orders of magnitude, with the rate of off-nominal events and participation being the key variables.
1.11 Of particular note, this version of this specification does not establish requirements for fairness or equitable airspace access among UAS operations,
but instead includes requirements for the logging of information that will inform future requirements in this area.
1.12 Usage:
1.12.1 In a region where participating UAS operators voluntarily agree to or are required by the competent authority to comply with this specification,
it enables strategically deconflicted UAS operations as well as situational awareness for operations that may not be required to be strategically deconflicted. This specification is not
dependent upon the use of segregated or nonsegregated airspace.
1.12.2 For regions where this specification is required by a competent authority, this specification assumes regulations established by the competent
authority (or its delegate) identify any prioritization of operations and whether or not strategic conflicts are allowed between operations of the same priority. For example, it may be legal
in some jurisdictions for recreational operations to share airspace and have overlapping operational intents, relying on UAS personnel to coordinate and maintain visual separation; whereas in
other jurisdictions, this may not be allowed. The specification takes no position on allowed or disallowed strategic conflicts. Instead it addresses requirements for when conflicts are
allowed by regulations (for example, notifications to involved USSs and UAS personnel) and for when conflicts are not allowed (for example, replanning, inability to activate an operation with
nonallowed conflicts).
1.12.3 This specification is not intended to address the complete safety case for air collision risk. It provides a mechanism to address one portion of a
safety case, specifically the strategic separation of participating UAS from other participating UAS. Other technologies or procedures, outside the scope of this specification, may be
required to mitigate air risk with nonparticipating aircraft and to address other aspects of a complete safety case for air collision risk.
1.12.4 Through the use of constraints, this specification also provides awareness of geographically and time-limited airspace information to USS, UAS
personnel, or the operator’s automation, or combinations thereof. In circumstances where a constraint is used to represent the volume within which a manned operation is planned, it provides a
mechanism to address the strategic separation of participating UAS from the manned flight. However, USS responsibility is limited to providing awareness of constraints, and it is the
responsibility of the UAS personnel to comply with any regulatory aspect of constraints.
1.13 Applicability:
1.13.1 This specification applies to operations conducted in a connected environment, meaning the UAS personnel have access to the USS (typically by
means of the internet) and connectivity to the Unmanned Aircraft (UA). This specification anticipates and accommodates limited gaps in connectivity, but does not purport to address operations
in locations where persistent connectivity is unavailable.
1.13.2 This specification does not purport to address tactical conflicts between UAS. Notifications and data sharing requirements in this specification
associated with Strategic Conflict Detection and Conformance Monitoring for Situational Awareness may be useful in aiding some tactical conflict detection and dynamic rerouting capabilities.
However, those capabilities are beyond the scope of this specification, and an implementation cannot assert compliance for tactical conflict detection or dynamic rerouting using this
specification.
1.13.3 This specification does not purport to address conflicts between UAS and manned aircraft outside of instances where a manned operation is
encapsulated in a constraint.
1.13.4 This specification does not purport to address authorization for UAS to operate in controlled or uncontrolled airspace.
1.13.5 This specification does not purport to address UAS that are not participating in UTM.
1.14 Relationship to Other International UTM Standards and Specifications:
1.14.1 It is an objective of this specification to be compatible with certain UTM specifications that address common subject matter and are developed
under other standards development organizations (SDOs).
1.14.2 The existence of multiple specifications on the same subject matter can occur when the regulatory environment in a region requires that a
necessary specification be developed by a particular SDO. In these cases, ASTM International seeks to establish a cooperation arrangement with the applicable SDO to ensure consistency between
the related specifications.
1.14.3 This specification also seeks to support an international audience where differing regulatory requirements can exist. Where practical, this
specification accommodates the differing requirements through a superset approach using a variety of techniques such as optional features and features that are configured to support a
particular regulatory ruleset.
1.14.4 A summary of related specifications and the techniques used to achieve compatibility is provided in Appendix
X3.
1.15 The values stated in SI units are to be regarded as standard.
1.15.1 Units of measurement included in this specification:
cm
|
centimeters
|
km
|
kilometers
|
m
|
meters
|
deg, °
|
degrees of latitude and longitude, compass direction
|
s
|
seconds
|
Hz
|
Hertz (frequency)
|
time
|
unless otherwise specified, formatted in accordance with IETF RFC 3339
|
1.16 Table of Contents:
Title
|
Section
|
Scope
|
1
|
Referenced Documents
|
2
|
Terminology
|
3
|
Conceptual Overview
|
4
|
Performance Requirements
|
5
|
Test Methods:
|
|
Scope
|
6
|
Significance and Use
|
7
|
Hazards
|
8
|
Test Units
|
9
|
Procedure
|
10
|
Product Marking
|
11
|
Packaging and Package Marking
|
12
|
Precision and Bias
|
13
|
Keywords
|
14
|
Table of Values
|
Annex A1
|
Interoperability Requirements and DSS Testing
|
Annex A2
|
USS-DSS and USS-USS OpenAPI YAML Description
|
Annex A3
|
Reference Architectures for Interoperability Security Controls
|
Appendix X1
|
Future Work Items
|
Appendix X2
|
Compatibility with Related Standards
|
Appendix X3
|
Safety Case for Strategic Deconfliction
|
Appendix X4
|
Failure Modes and Effects Analysis
|
Appendix X5
|
UTM Ecosystem Testing Strategy
|
Appendix X6
|
List of Working Group Participants and Contributors
|
Appendix X7
|
Related Material
|
|
1.17 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this
standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.18 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision
on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Keywords
conformance monitoring; constraints; discovery and synchronization service; interoperability; operational intents; strategic conflict detection; strategic deconfliction; Unmanned Aircraft Systems
(UAS); UAS Service Supplier (USS); UAS Traffic Management (UTM); U-Space Service Provider (USSP);
ICS Code
ICS Number Code n/a
DOI: 10.1520/F3548-21
This book also exists in the following packages...
Year |
Publisher |
Title |
|
Annual Price |
 |
VAR
|
ASTM
|
|
[+]
|
$532.97 |
Buy |
|
2007 |
ASTM
|
|
|
|
2006 |
ASTM
|
|
|
|
2005 |
ASTM
|
|
|
|
2006 |
ASTM
|
|
|
|
2008 |
ASTM
|
|
|
|
2006 |
ASTM
|
|
|
|
2006 |
ASTM
|
|
|
|
2008 |
ASTM
|
|
|
|
2008 |
ASTM
|
|
|
|
2009 |
ASTM
|
|
|
|
|
|
|
|
VAR
|
ASTM
|
|
[+]
|
$7,461.55 |
Buy |
|
2003 |
ASTM
|
|
|
|
1995 |
ASTM
|
|
|
|
2004 |
ASTM
|
|
|
|
2006 |
ASTM
|
|
|
|
2007 |
ASTM
|
|
|
|
2006 |
ASTM
|
|
|
|
2004 |
ASTM
|
|
|
|
2000 |
ASTM
|
|
|
|
2005 |
ASTM
|
|
|
|
2003 |
ASTM
|
|
|
|
|
|
|
|
Subscription Information
MADCAD.com ASTM Standards subscriptions are annual and access is unlimited concurrency based (number of people that can access the subscription at any given time) from single office location. For pricing on multiple office location ASTM Standards Subscriptions, please contact us at info@madcad.com or +1 800.798.9296.
Some features of MADCAD.com ASTM Standards Subscriptions are:
- Online access: With MADCAD.com’ s web based subscription service no downloads or installations are required. Access ASTM Standards from any browser on your computer, tablet or smart phone.
- Immediate Access: As soon as the transaction is completed, your ASTM Standards Subscription will be ready for access.
For any further information on MADCAD.com ASTM Standards Subscriptions, please contact us at info@madcad.com or +1 800.798.9296.
About ASTM
ASTM International, formerly known as the American Society for Testing and Materials (ASTM), is a globally recognized leader in the development and delivery of international voluntary consensus standards. Today, some 12,000 ASTM standards are used around the world to improve product quality, enhance safety, facilitate market access and trade, and build consumer confidence. ASTM’s leadership in international standards development is driven by the contributions of its members: more than 30,000 of the world’s top technical experts and business professionals representing 150 countries. Working in an open and transparent process and using ASTM’s advanced electronic infrastructure, ASTM members deliver the test methods, specifications, guides, and practices that support industries and governments worldwide.
|
|