Abstract

This specification covers minimum photometric requirements for newly applied photoluminescent (phosphorescent) safety materials used to provide supplemental markings of escape routes, emergency equipment, and obstructions along the escape route. This specification does not cover potentially diminished performance due to wear and tear and aging. The photoluminescent safety materials shall be tested and shall conform to optical requirements and to the specified values of on-site luminance, activation, and marking width.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification covers minimum photometric requirements for newly applied photoluminescent (phosphorescent) safety materials used to provide supplemental markings of escape routes, emergency equipment, and obstructions along the escape route. (see also Test Method E2073 and Guide E2030 ).

1.2 This specification establishes minimum luminance values for photoluminescent (phosphorescent) markings.

1.3 This specification applies to all types of photoluminescent (phosphorescent) markings, including but not limited to plastics, coatings, ceramics, films, etc.

1.4 This specification does not cover potentially diminished performance due to wear and tear and aging.

1.5 This specification applies only to photoluminescent (phosphorescent) markings emitting the majority of spectral energy within the 515 to 535 nanometer range.

1.6 When reference is made regarding photoluminescence in the text of this standard, it implies phosphorescence.

1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

E284 Terminology of Appearance

E1316 Terminology for Nondestructive Examinations

E2030 Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings

E2073 Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings

Keywords

escape routes; luminance; photoluminescent safety markings; Blackout conditions; Escape routes; Luminescent materials/applications--specifications; Pavement surfaces--specifications; Photoluminescence--specifications; Safety precautions; Traffic;

ICS Code

ICS Number Code 13.100 (Occupational safety. Industrial hygiene)

DOI: 10.1520/E2072-10

ASTM International is a member of CrossRef.

ASTM E2072