Significance and Use

Although this practice is intended for the collection of dried paint samples in and around buildings for the subsequent determination of lead content, this practice may also be used to collect paint samples from other structures for lead analysis. ³

^{The variability associated with the sampling of dried paint is generally considered to be far higher than the variability associated with the analyses of the paint specimens. Therefore, it is essential that sample collection be properly controlled to produce representative and meaningful samples.}

^{These samples are collected in a manner that will permit subsequent digestion and determination of lead using laboratory analysis techniques such as Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) and Flame Atomic Absorption Spectrometry (FAAS) (see Test Method E 1613 ), or using field analysis techniques such as anodic stripping voltammetry (see Test Method E 2051 ).}

^{1. Scope}

^{1.1 This practice covers the collection of samples of dried paint and other coatings from buildings.}

^{1.2 This practice is used to collect samples for subsequent determination of lead on an area basis (milligrams of lead per area sampled) or concentration basis (milligrams of lead per gram of dried paint collected or mass percent).}

^{1.3 This practice does not address the sampling design criteria (that is, sampling plan that includes the number and location of samples) that are used for risk assessment and other lead hazard activities.}

^{1.4 This practice contains notes that are explanatory and are not part of the mandatory requirements of this practice.}

^{1.5 The values stated in SI units are to be regarded as the standard.}

^{1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.}

^{2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.}

^{ASTM Standards}

^{E1605 Terminology Relating to Lead in Buildings}

^{E1613 Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques}

^{E2051 Practice for the Determination of Lead in Paint, Settled Dust, Soil and Air Particulate by Field-Portable Electroanalysis}

^{E2239 Practice for Record Keeping and Record Preservation for Lead Hazard Activities}

^Keywords

^{coring; lead; paint; sample collection; scraping;}

^{ICS Code}

^{ICS Number Code 71.040.50 (Physicochemical methods of analysis)}

^{DOI: 10.1520/E1729-05}

^{ASTM International is a member of CrossRef.}

^{ASTM E1729}