1. Scope

1.1 This specification covers the design, construction, and weatherability of structural standing seam aluminum roof panel systems that resist all superimposed design loads without the benefit of supporting deck or sheathing. It includes performance requirements for the following elements only: panels, concealed panel clips, panel/clip anchorage, and panel joint sealers.

1.2 The objective of this specification is to provide for the overall performance of the standing seam aluminum roof panel system in accordance with 1.1 during its service life in order to provide weather protection, carry the specified design loads, and allow proper access over the roof surface in order to provide periodic maintenance of the equipment by the building owner.

1.3 In addition to structural characteristics, the specifier shall evaluate other characteristics beyond the scope of this specification that affect the final choice of roof construction. These include, but are not limited to, functional, legal, insurance, and economic considerations. See Appendix X1 for the designer's checklist.

1.4 This specification is not intended to exclude products or systems not covered by the referenced documents.

1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

B209 Specification for Aluminum and Aluminum-Alloy Sheet and Plate

C711 Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants

C765 Test Method for Low-Temperature Flexibility of Preformed Tape Sealants

C879 Test Methods for Release Papers Used with Preformed Tape Sealants

D1667 Specification for Flexible Cellular Materials--Poly (Vinyl Chloride) Foam (Closed-Cell)

D3310 Test Method for Determining Corrosivity of Adhesive Materials

E631 Terminology of Building Constructions

E1592 Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference

E1646 Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference

E1680 Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems

G21 Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi

AISI Document

MBMA Document

FM Approvals LLC Standard

Keywords

aluminum; anchorage; clips; construction; deflection; endlaps; environmental; exposed; exposures; fasteners; flashings; installation; joints; loading; loads; low-sloped; metal; oil canning; panels; penetrations; ponding; roof; sealer; seismic; service life; sidelap; slope; snow; standing seam; structural; superimposed; tapes; thermal; uplift; water; weathertightness: Aluminum roofing materials--specifications; Anchors/anchorage systems; Architectural materials/applications--specifications; Clips; Construction--building materials/applications; Deflection--building constructions/materials; Endlaps; Environmental control/fate--building applications; Exposures; Fasteners (metal)--specifications; Fasteners (structural); Flashing; Installation--building materials/applications; Joints--specifications; Low-sloped roofs; Metals and metallic materials; Oil canning; Panels; Penetration; Roofing materials/applications--specifications; Roofing membranes--specifications; Sealing; Service life processing/analysis; Side lap; Slope; Standing seam; Structural building materials/applications--specifications; Structural metals/alloys--specifications; Thermal analysis (TA); Uplift

ICS Code

ICS Number Code 77.150.10 (Aluminium products); 91.060.20 (Roofs); 91.100.99 (Other construction materials)

DOI: 10.1520/E1637-98

ASTM International is a member of CrossRef.