ASTM D6195-97
Historical Standard: ASTM D6195-97 Standard Test Methods for Loop Tack
SUPERSEDED (see Active link, below)
ASTM D6195
1. Scope
1.1 These test methods cover the determination of properties of a pressure-sensitive adhesive. This test method is applicable to those adhesives that form a bond of measurable strength rapidly upon contact with another surface. Tack force may be measured as the force required to separate the adhesive from the adhered at the interface shortly after they have been brought into contact under a load equal only to the weight of the pressure-sensitive article (for example, tape, label, sticker, etc.) on a 1 in. contact area.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
A666 Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
D907 Terminology of Adhesives
D2651 Guide for Preparation of Metal Surfaces for Adhesive Bonding
E4 Practices for Force Verification of Testing Machines
E171 Practice for Conditioning and Testing Flexible Barrier Packaging
E177 Practice for Use of the Terms Precision and Bias in ASTM Test Methods
E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
Tag and Label Manufacturers Institute, Inc. (TLMI) Standard
L-IB2 Tensile Tester Loop Tack TestKeywords
adhesive; loop tack; pressure-sensitive article; tack; Adhesives; Loop tack; Pressure-sensitive adhesives; Tack force ;
ICS Code
ICS Number Code 83.180 (Adhesives)
DOI: 10.1520/D6195-97
ASTM International is a member of CrossRef.