ASTM D6167-97e1
Historical Standard: ASTM D6167-97e1 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
SUPERSEDED (see Active link, below)
ASTM D6167
1. Scope
1.1 This guide covers the general procedures necessary to conduct caliper logging of boreholes, wells, access tubes, caissons, or shafts (hereinafter referred as boreholes) as commonly applied to geologic, engineering, ground-water and environmental (hereinafter eeferred as geotechnical) investigations. Caliper logging for mineral or petroleum exploration and development are excluded.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D653 Terminology Relating to Soil, Rock, and Contained Fluids
D5088 Practice for Decontamination of Field Equipment Used at Waste Sites
D5608 Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites
D5753 Guide for Planning and Conducting Borehole Geophysical Logging
Keywords
borehole correction; borehole diameter; borehole geophysics; borehole volume; caliper log; groundwater; single-arm caliper; three-arm caliper; well construction; well logging: Acoustic logging; Borehole geophysical logging; Caliper logging; Fluid conductivity/resistivity logging; Ground water; Mechanical analysis/testing; Single-arm caliper; Three-arm caliper; Well construction;
ICS Code
ICS Number Code 19.060 (Mechanical testing)
DOI: 10.1520/D6167-97E01
ASTM International is a member of CrossRef.