ASTM D611-07
Historical Standard: ASTM D611-07 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
SUPERSEDED (see Active link, below)
ASTM D611
1. Scope
1.1 These test methods cover the determination of the aniline point of petroleum products and hydrocarbon solvents. Test Method A is suitable for transparent samples with an initial boiling point above room temperature and where the aniline point is below the bubble point and above the solidification point of the aniline-sample mixture. Test Method B, a thin-film method, is suitable for samples too dark for testing by Test Method A. Test Methods C and D are for samples that may vaporize appreciably at the aniline point. Test Method D is particularly suitable where only small quantities of sample are available. Test Method E describes a procedure using an automatic apparatus suitable for the range covered by Test Methods A and B.
1.2 These test methods also cover the determination of the mixed aniline point of petroleum products and hydrocarbon solvents having aniline points below the temperature at which aniline will crystallize from the aniline-sample mixture.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific warning statements are given in Section 7.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D1500 Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
E1 Specification for ASTM Liquid-in-Glass Thermometers
Keywords
aniline point; aromatics; mixed aniline point;
ICS Code
ICS Number Code 71.080.01 (Organic chemicals in general); 87.060.30 (Solvents)
DOI: 10.1520/D0611-07
ASTM International is a member of CrossRef.
