ASTM D4304-99
Historical Standard: ASTM D4304-99 Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines
SUPERSEDED (see Active link, below)
ASTM D4304
1. Scope
1.1 This specification covers mineral oils used in steam and gas turbine lubrication systems where the performance requirements demand a highly refined mineral base oil compounded with rust and oxidation inhibitors plus selected additives as needed to control foam, wear, demulsibility, and so forth.
1.2 This specification is intended to define the properties of mineral oil-based turbine lubricating oils that are functionally interchangeable with existing oils of this type, and are compatible with most existing machinery components and, with appropriate field maintenance, will maintain their functional characteristics.
1.3 This specification is intended to define only new lubricating oil before it is installed in the machinery.
1.4 This specification is intended to be used as a guide. It is possible that oils that do not meet this specification may perform satisfactorily in some turbines.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D92 Test Method for Flash and Fire Points by Cleveland Open Cup Tester
D97 Test Method for Pour Point of Petroleum Products
D130 Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
D445 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
D664 Test Method for Acid Number of Petroleum Products by Potentiometric Titration
D665 Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
D892 Test Method for Foaming Characteristics of Lubricating Oils
D943 Test Method for Oxidation Characteristics of Inhibited Mineral Oils
D974 Test Method for Acid and Base Number by Color-Indicator Titration
D1401 Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
D1500 Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
D2272 Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
D2422 Classification of Industrial Fluid Lubricants by Viscosity System
D3339 Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
D3427 Test Method for Air Release Properties of Petroleum Oils
D4052 Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
D4057 Practice for Manual Sampling of Petroleum and Petroleum Products
D4310 Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
D5182 Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
D6304 Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ISO Standards
ISO4406 Particle Count AnalysisKeywords
combined cycle turbine oil; gas turbine oil; mineral oil; R and O oils; steam turbine oil; turbine lubricating oils; turbine lubrication systems;
ICS Code
ICS Number Code 75.100 (Lubricants, industrial oils and related products)
DOI: 10.1520/D4304-99
ASTM International is a member of CrossRef.
