ASTM D4287-94
Historical Standard: ASTM D4287-94 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
SUPERSEDED (see Active link, below)
ASTM D4287
1. Scope
1.1 This test method covers the determination of the viscosity of paints, varnishes, and related products at a rate of shear of 12 000 s -1 .
1.2 Paints and varnishes that dry very rapidly may not give reproducible results with this test method. Measurements made at elevated temperatures may also give poor precision due to loss of volatiles and to drying.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D1210 Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
D3925 Practice for Sampling Liquid Paints and Related Pigmented Coatings
D4958 Test Method for Comparison of the Brush Drag of Latex Paints
Keywords
viscosity paints/related coatings/materials; viscometer ICI cone/plate ; viscometer cone/plate; Application viscosity (for paints/related products); Cone-and-plate viscometers; Flow and flow rate--paints/related coatings/materials; ICI cone/plate viscometers; Latex paints; Varnishes; Viscosity--paints/related coatings/materials; Viscosity at high shear ;
ICS Code
ICS Number Code 87.040 (Paints and varnishes)
DOI: 10.1520/D4287-94
ASTM International is a member of CrossRef.