1. Scope

1.1 These test methods cover procedures for testing rigid electrical insulation normally manufactured in flat sheet or plate form. They are generally used as terminal boards, spacers, voltage barriers, and circuit boards.

Note 1For tests applying to vulcanized fibre reference should be made to Test Methods D 619.

1.2 The test methods appear in the following sections:

1.3 The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units given in these test methods may be approximate.

1.4 This is a fire-test-response standard. See Sections 61 through 75, which are the procedures for burning rate and flame resistance.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in 31.1 and 61.5.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D149 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies

D150 Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation

D256 Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics

D257 Test Methods for DC Resistance or Conductance of Insulating Materials

D374 Test Methods for Thickness of Solid Electrical Insulation

D494 Test Method for Acetone Extraction of Phenolic Molded or Laminated Products

D495 Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation

D570 Test Method for Water Absorption of Plastics

D617 Test Method for Punching Quality of Phenolic Laminated Sheets

D619 Test Methods for Vulcanized Fibre Used for Electrical Insulation

D638 Test Method for Tensile Properties of Plastics

D669 Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials

D695 Test Method for Compressive Properties of Rigid Plastics

D696 Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30C and 30C with a Vitreous Silica Dilatometer

D785 Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

D790 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

D792 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

D883 Terminology Relating to Plastics

D1674 Test Method for Testing Polymerizable Embedding Compounds Used for Electrical Insulation

D1711 Terminology Relating to Electrical Insulation

D1825 Practice for Etching and Cleaning Copper-Clad Electrical Insulating Materials and Thermosetting Laminates for Electrical Testing

D2132 Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials

D2303 Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials

D3487 Specification for Mineral Insulating Oil Used in Electrical Apparatus

D5032 Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions

D6054 Practice for Conditioning Electrical Insulating Materials for Testing

E176 Terminology of Fire Standards

E197 Specification for Enclosures and Servicing Units for Tests Above and Below Room Temperature

IEC Standard

International Organization for Standardization (ISO) Standard

Keywords

ac breakdown voltage; arc resistance; ash content; bond strength; compressive strength; dissipation factor; elastic modulus; flame resistance; flexural strength; hard rubber; impact resistance; insulation resistance; permittivity; printed wiring boards; resistivity; rigid plates; rigid sheets; Rockwell hardness; solvent extractible; spacers; surface resistance; surface resistivity; tensile strength; terminal boards; thermal expansion; thermosetting laminate; thickness; tracking resistance; twist; voltage barriers; volume resistivity; warp; water absorption
; Modulus of elasticity--plastics; Permittivity (dielectric constant)--electrical insulating materials; Thermal endurance--electrical insulating materials; Rigid plastics; Sheet materials (general)--electrical insulating; Thermosetting plastics; Spacers; Tensile properties/testing--electrical insulating materials; Twist; Terminal boards; Voltage barriers; Warpage; Dielectric breakdown voltage; Dimensional change; Electrical insulating plastics; Laminates (electrical insulation); Electrical insulating rubber; Electrical resistance/resistivity--insulating materials; Fire-resistant materials/testing; Flammability--electrical insulating materials; Flexural testing--electrical insulating materials; Ignition--electrical insulating materials; Insulation resistance; Circuit boards; Asbestos; Ash--insulating materials; Bond strength--electrical insulating materials; Bridge-type electrical/electronic materials; Burning characteristics--insulating materials; Burning characteristics--plastics ;

ICS Code

ICS Number Code 29.035.01 (Insulating materials in general)

DOI: 10.1520/D0229-96

ASTM International is a member of CrossRef.