ASTM C1432-03
Historical Standard: ASTM C1432-03 Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis
SUPERSEDED (see Active link, below)
ASTM C1432
1. Scope
1.1 This test method covers the determination of 25 elements in plutonium (Pu) materials. The Pu is dissolved in acid, the Pu matrix is separated from the target impurities by an ion exchange separation, and the concentrations of the impurities are determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES).
1.2 This test method is specific for the determination of impurities in 8 M HNO 3 solutions. Impurities in other plutonium materials, including plutonium oxide samples, may be determined if they are appropriately dissolved (see Practice C 1168) and converted to 8 M HNO 3 solutions.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
C757 Specification for Nuclear-Grade Plutonium Dioxide Powder, Sinterable
C758 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal
C759 Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
C1168 Practice for Preparation and Dissolution of Plutonium Materials for Analysis
D1193 Specification for Reagent Water
Keywords
conversion; nuclear fuel; reduction; uranium dioxide; uranium oxide; Blended uranium oxides; Conversion; Nuclear fuels (reactor)--specifications; Nuclear materials/applications--specifications; Reduction; Sinterability; Uranium--specifications; Uranium dioxide; Uranium oxide (U 3 O 8 ); Uranium trioxide;
ICS Code
ICS Number Code 27.120.30 (Fissile materials and nuclear fuel technology)
DOI: 10.1520/C1432-03
ASTM International is a member of CrossRef.