ASTM C1021-97
Historical Standard: ASTM C1021-97 Standard Practice for Laboratories Engaged in the Testing of Building Sealants
SUPERSEDED (see Active link, below)
ASTM C1021
1. Scope
1.1 This practice describes the qualifications, including minimum requirements for personnel and equipment, duties, responsibilities, and services of independent commercial materials testing laboratories engaged in the testing of caulking and sealants used in building construction.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.2 The subcommittee with jurisdiction of this standard is not aware of any similar or equivalent ISO standard.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
C510 Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
C603 Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
C639 Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C661 Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
C679 Test Method for Tack-Free Time of Elastomeric Sealants
C681 Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
C711 Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
C712 Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
C717 Terminology of Building Seals and Sealants
C719 Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
C731 Test Method for Extrudability, After Package Aging, of Latex Sealants
C732 Test Method for Aging Effects of Artificial Weathering on Latex Sealants
C734 Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
C736 Test Method for Extension-Recovery and Adhesion of Latex Sealants
C792 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
C793 Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
C794 Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C834 Specification for Latex Sealants
C910 Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
C920 Specification for Elastomeric Joint Sealants
C961 Test Method for Lap Shear Strength of Sealants
C1087 Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1135 Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1183 Test Method for Extrusion Rate of Elastomeric Sealants
C1184 Specification for Structural Silicone Sealants
C1216 Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
C1241 Test Method for Volume Shrinkage of Latex Sealants During Cure
C1246 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
C1247 Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
C1248 Test Method for Staining of Porous Substrate by Joint Sealants
C1257 Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
C1265 Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
C1294 Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
C1311 Specification for Solvent Release Sealants
C1367 Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
C1382 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
C1442 Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
C1501 Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
C1519 Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
C1589 Practice for Outdoor Weathering of Construction Seals and Sealants
C1635 Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
D2202 Test Method for Slump of Sealants
D2203 Test Method for Staining from Sealants
D2377 Test Method for Tack-Free Time of Caulking Compounds and Sealants
D2452 Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
D2453 Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
E1301 Guide for Proficiency Testing by Interlaboratory Comparisons
E1323 Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
E1580 Guide for Surveillance of Accredited Laboratories
Keywords
certification; independent; testing laboratory; Laboratory--building/construction materials analysis; Sealants; Testing and inspection agencies;
ICS Code
ICS Number Code 91.100.50 (Binders. Sealing materials)
DOI: 10.1520/C1021-97
ASTM International is a member of CrossRef.