ASTM C1007-00
Historical Standard: ASTM C1007-00 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
SUPERSEDED (see Active link, below)
ASTM C1007
1. Scope
1.1 This specification covers the installation and erection requirements for load bearing (transverse and axial) steel studs and related accessories 0.0329 in. (0.836 mm) to 0.1120 in. (2.845 mm) thick.
1.2 Values stated in inch-pound units are to be regarded as the standard. The SI (metric) values given in parentheses are approximate and are provided for information purposes only.
1.3 The text of this standard references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
C11 Terminology Relating to Gypsum and Related Building Materials and Systems
C841 Specification for Installation of Interior Lathing and Furring
C954 Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
C955 Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
C1063 Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
American Iron and Steel Institute Publication (AISI)
S100 North American Specification for the Design of Cold-Formed Steel Structural Members - 2007 Edition Available from American Iron and Steel Institute (AISI), 1140 Connecticut Ave., NW, Suite 705, Washington, DC 20036, http://www.steel.org.American Welding Society Documents (AWS)
D1.3 Specification for Welding Sheet Steel in Structures Available from American Welding Society (AWS), 550 NW LeJeune Rd., Miami, FL 33126, http://www.aws.org.Military Specification
MIL-P-21035 Paint, High Zinc Dust Content, Galvanizing Repair Available from Standardization Documents Order Desk, Bldg. 4 Section D, 700 Robbins Ave., Philadelphia, PA 19111-5094, Attn: NPODS.Federal Specification
AISICOSP Code of Standard Practice for Cold-Formed Steel Structural Framing - 2006 EditionKeywords
axial; loadbearing; runners; steel; studs; tracks; transverse; Gypsum products--specifications; Installation--gypsum products; Loadbearing steel--specifications; Partitions; Runners; Studs--gypsum board applications; Studs (materials/applications)--specifications; Transverse load-bearing materials/applications;
ICS Code
ICS Number Code 21.060.10 (Bolts, screws, studs)
DOI: 10.1520/C1007-00
ASTM International is a member of CrossRef.
