ASTM A801-04
Historical Standard: ASTM A801-04 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)
SUPERSEDED (see Active link, below)
ASTM A801
1. Scope
1.1 This specification covers two wrought iron-cobalt alloy types currently manufactured and supplied commercially for use in magnetic components requiring high permeability at and above 15 kG (1.5 T) or high magnetic saturation. The specific alloy types covered are:
Alloy Type | UNS | Nominal Composition |
1 | R30005 | 49 % Co, 49 % Fe, 2 % V |
2 | K92650 | 27 % Co, 0.50 % Cr, balance Fe |
1.1.1 This specification also covers material supplied by a producer in the form and physical condition suitable for fabrication into parts that will later be given final heat treatment to achieve the desired magnetic characteristics and, where required, mechanical properties. It covers material supplied in form of forging billets, hot-rolled products, cold-finished bars, and strip.
1.2 This specification does not cover parts produced by casting or by powder metallurgical techniques.
1.3 The values stated in customary (cgs-emu and inch-pound) units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units which are provided for information only and are not considered standard.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
A34/A34M Practice for Sampling and Procurement Testing of Magnetic Materials
A340 Terminology of Symbols and Definitions Relating to Magnetic Testing
A341/A341M Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods
A596/A596M Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
A773/A773M Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
E1019 Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
Keywords
core loss; iron-cobalt alloy; magnetic flux density; magnetic saturation; Electrical conductors; Iron cobalt alloys; Magnetic materials/applications--specifications; Permeability--magnetic alloys; UNS K92650 (Fe-Co soft magnetic alloy); UNS R30005 (Co-Ni-Cr-Mo alloy, MP-35-N); Wrought iron-cobalt alloys;
ICS Code
ICS Number Code 77.080.10 (Irons)
DOI: 10.1520/A0801-04
ASTM International is a member of CrossRef.