ASTM A732/A732M-98e1
Historical Standard: ASTM A732/A732M-98e1 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
SUPERSEDED (see Active link, below)
ASTM A732 / A732M
1. Scope
1.1 This specification covers carbon and low-alloy steel castings made by the investment casting process.
1.2 Fifteen grades of steel and two cobalt alloy grades are covered (see Appendix)
. Note 1An investment casting is one that is produced in a mold, obtained by investing (surrounding) an expendable pattern with a refractory slurry which is allowed to solidify. The expendable pattern may consist of wax, plastic, or other material and is removed by heating prior to filling the mold with liquid metal.
1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
A370 Test Methods and Definitions for Mechanical Testing of Steel Products
A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A957 Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A994 Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
A997 Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
E21 Test Methods for Elevated Temperature Tension Tests of Metallic Materials
E139 Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
Keywords
alloy steel; carbon steel; cobalt alloys; investment castings; steel castings; Alloy steel castings--specifications; Carbon steel castings--specifications; Cobalt alloys--specifications; Elevated temperature service applications; Investment castings--specifications; Low-alloy steel--specifications;
ICS Code
ICS Number Code 77.140.80 (Iron and steel castings)
DOI: 10.1520/A0732_A0732M-98E01
ASTM International is a member of CrossRef.