1. Scope

1.1 This specification covers several grades of carbon and low-alloy steel forged or ring-rolled flanges, forged fittings and valves intended primarily for low-temperature service and requiring notch toughness testing. They are made to specified dimensions, or to dimensional standards, such as the ASME and API Specifications referenced in Section 2. Although this specification covers some piping components machined from rolled bar and seamless tubular materials (see 5.3.3), it does not cover raw material produced in these product forms.

1.2 No limitation on size is intended beyond the ability of the manufacturer to obtain the specified requirements. However, Class 3 of Grade LF787 is only available in the quenched-and-precipitation heat treated condition.

1.3 Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified by the purchaser in the order.

1.4 This specification is expressed in both inch-pound units and in SI units. However, unless the order specifies the applicable M specification designation (SI units), the material shall be furnished to inch-pound units.

1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact quivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

A788/A788M Specification for Steel Forgings, General Requirements

A961/A961M Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

Keywords

carbon equivalent; pipe fittings, steel; piping applications; pressure containing parts; steel flanges; steel forgings, alloy; steel forgings, carbon; steel valves; temperature service applications, low; Alloy steel forgings--specifications; Alloy steel pipe--specifications; Carbon steel forgings--specifications; Carbon steel pipe--specifications; Notch toughness; Steel fittings--specifications; Steel flanges--specifications; Steel valves--specifications; Low-temperature service applications--steel; Alloy steel forgings--specifications; Alloy steel pipe--specifications; Carbon steel forgings--specifications; Carbon steel pipe--specifications; Notch toughness; Steel fittings--specifications; Steel flanges--specifications; Steel valves--specifications; Low-temperature service applications--steel

ICS Code

ICS Number Code 23.040.40 (Metal fittings)

DOI: 10.1520/A0350_A0350M-11

ASTM International is a member of CrossRef.