Content Description

Over 1,300 ASTM construction specifications, practices, and test methods, compiled from the Annual Book of ASTM Standards, enable you to:

• Meet International Code Requirements

• Stay Informed and Remain Competitive

• Specify the Right Material for the Job • Understand the Significance and Use of the Standards

• Speak a Common Language that the Entire Industry Recognizes Provides easy access to the latest versions of the ASTM standards referenced by: • The 2006 International Codes published by ICC • Canadian National Building Code/Canadian National Fire Code • Uniform Plumbing Code and Uniform Mechanical Code • MASTERSPEC© • BSD SpecLink© • NFPA5000®--Building Construction and Safety Code® • SPECTEXT® Master Guide Specifications Standards cover:

• Materials addresses product quality characteristics such as composition, dimension, and uniformity • Design & Engineering explores design procedures, engineering formulas, and methods of testing to determine the physical, functional, or performance characteristics of specific materials or products • Installation governs installation of specific products or systems

• Testing identifies methods and procedures for evaluating structural strength, fire resistance, and other performance criteria.

• ASTM A 6/A 6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
• ASTM A 27/A 27M Standard Specification for Steel Castings, Carbon, for General Application
• ASTM A 29/A 29M Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
• ASTM A 36/A 36M Standard Specification for Carbon Structural Steel
• ASTM A 47/A 47M Standard Specification for Ferritic Malleable Iron Castings
• ASTM A 48/A 48M Standard Specification for Gray Iron Castings
• ASTM A 53/A 53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
• ASTM A 74 Standard Specification for Cast Iron Soil Pipe and Fittings
• ASTM A 82/A 82M Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
• ASTM A 90/A 90M Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
• ASTM A 105/A 105M Standard Specification for Carbon Steel Forgings for Piping Applications
• ASTM A 106/A 106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
• ASTM A 108 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
• ASTM A 116 Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric
• ASTM A 121 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
• ASTM A 123/A 123M Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
• ASTM A 126 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
• ASTM A 135/A 135M Standard Specification for Electric-Resistance-Welded Steel Pipe
• ASTM A 139/A 139M Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
• ASTM A 148/A 148M Standard Specification for Steel Castings, High Strength, for Structural Purposes
• ASTM A 153/A 153M Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
• ASTM A 167 Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
• ASTM A 176 Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
• ASTM A 182/A 182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valve
• ASTM A 183 Standard Specification for Carbon Steel Track Bolts and Nuts
• ASTM A 184/A 184M Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
• ASTM A 185/A 185M Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
• ASTM A 193/A 193M Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pres
• ASTM A 194/A 194M Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service
• ASTM A 197/A 197M Standard Specification for Cupola Malleable Iron
• ASTM A 213/A 213M Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchange
• ASTM A 216/A 216M Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
• ASTM A 229/A 229M Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs
• ASTM A 234/A 234M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Tempe
• ASTM A 240/A 240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure V
• ASTM A 242/A 242M Standard Specification for High-Strength Low-Alloy Structural Steel
• ASTM A 249/A 249M Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
• ASTM A 252 Standard Specification for Welded and Seamless Steel Pipe Piles
• ASTM A 254 Standard Specification for Copper-Brazed Steel Tubing
• ASTM A 264 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate
• ASTM A 269 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
• ASTM A 270 Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
• ASTM A 276 Standard Specification for Stainless Steel Bars and Shapes
• ASTM A 278/A 278M Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650F (350C)
• ASTM A 283/A 283M Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
• ASTM A 307 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
• ASTM A 308/A 308M Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
• ASTM A 309 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
• ASTM A 312/A 312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
• ASTM A 313/A 313M Standard Specification for Stainless Steel Spring Wire
• ASTM A 320/A 320M Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
• ASTM A 325 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
• ASTM A 325M Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
• ASTM A 328/A 328M Standard Specification for Steel Sheet Piling
• ASTM A 354 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
• ASTM A 370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
• ASTM A 376/A 376M Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
• ASTM A 377 Standard Index of Specifications for Ductile-Iron Pressure Pipe
• ASTM A 391/A 391M Standard Specification for Grade 80 Alloy Steel Chain
• ASTM A 392 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
• ASTM A 395/A 395M Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
• ASTM A 403/A 403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
• ASTM A 413/A 413M Standard Specification for Carbon Steel Chain
• ASTM A 416/A 416M Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
• ASTM A 420/A 420M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
• ASTM A 421/A 421M Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
• ASTM A 424 Standard Specification for Steel, Sheet, for Porcelain Enameling
• ASTM A 435/A 435M Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
• ASTM A 449 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Stren
• ASTM A 463/A 463M Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
• ASTM A 466/A 466M Standard Specification for Weldless Chain
• ASTM A 467/A 467M Standard Specification for Machine and Coil Chain
• ASTM A 475 Standard Specification for Zinc-Coated Steel Wire Strand
• ASTM A 478 Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
• ASTM A 479/A 479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
• ASTM A 480/A 480M Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Shee
• ASTM A 489 Standard Specification for Carbon Steel Lifting Eyes
• ASTM A 490 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
• ASTM A 490M Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
• ASTM A 491 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
• ASTM A 492 Standard Specification for Stainless Steel Rope Wire
• ASTM A 496/A 496M Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
• ASTM A 497/A 497M Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
• ASTM A 499 Standard Specification for Steel Bars and Shapes, Carbon Rolled from T Rails
• ASTM A 500/A 500M Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
• ASTM A 501 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
• ASTM A 510 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
• ASTM A 510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric]
• ASTM A 513 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
• ASTM A 514/A514M Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
• ASTM A 516/A 516M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
• ASTM A 518/A 518M Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
• ASTM A 529/A 529M Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
• ASTM A 532/A 532M Standard Specification for Abrasion-Resistant Cast Irons
• ASTM A 536 Standard Specification for Ductile Iron Castings
• ASTM A 554 Standard Specification for Welded Stainless Steel Mechanical Tubing
• ASTM A 555/A 555M Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
• ASTM A 563 Standard Specification for Carbons and Alloy Steel Nuts
• ASTM A 563M Standard Specification for Carbon and Alloy Steel Nuts [Metric]
• ASTM A 568/A 568M Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold
• ASTM A 572/A 572M Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
• ASTM A 574 Standard Specification for Alloy Steel Socket-Head Cap Screws
• ASTM A 574M Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
• ASTM A 575 Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
• ASTM A 580/A 580M Standard Specification for Stainless Steel Wire
• ASTM A 582/A 582M Standard Specification for Free-Machining Stainless Steel Bars
• ASTM A 586 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
• ASTM A 588/A 588M Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Poin
• ASTM A 603 Standard Specification for Zinc-Coated Steel Structural Wire Rope
• ASTM A 606 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improve
• ASTM A 615/A 615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
• ASTM A 618/A 618M Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
• ASTM A 625/A 625M Standard Specification for Tin Mill Products, Black Plate, Single-Reduced
• ASTM A 627 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
• ASTM A 635/A 635M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High
• ASTM A 641/A 641M Standard Specification for ZincCoated (Galvanized) Carbon Steel Wire
• ASTM A 645/A 645M Standard Specification for Pressure Vessel Plates, 5 % and 5 /2 % Nickel Alloy Steels, Specially Heat Treated
• ASTM A 653/A 653M Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by t
• ASTM A 656/A 656M Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formabilit
• ASTM A 666 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
• ASTM A 668/A 668M Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
• ASTM A 674 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
• ASTM A 675/A 675M Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
• ASTM A 690/A 690M Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling w
• ASTM A 703/A 703M Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
• ASTM A 704/A 704M Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
• ASTM A 706/A 706M Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
• ASTM A 716 Standard Specification for Ductile Iron Culvert Pipe
• ASTM A 722/A 722M Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete
• ASTM A 733 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
• ASTM A 743/A 743M Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General App
• ASTM A 746 Standard Specification for Ductile Iron Gravity Sewer Pipe
• ASTM A 755/A 755M Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coat
• ASTM A 760/A 760M Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
• ASTM A 764 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
• ASTM A 767/A 767M Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
• ASTM A 775/A 775M Standard Specification for Epoxy-Coated Steel Reinforcing Bars
• ASTM A 778 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
• ASTM A 780 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
• ASTM A 786/A 786M Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
• ASTM A 792/A 792M Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
• ASTM A 793 Standard Specification for Rolled Floor Plate, Stainless Steel
• ASTM A 794 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
• ASTM A 795/A 795M Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fi
• ASTM A 798/A 798M Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
• ASTM A 809 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
• ASTM A 817 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
• ASTM A 820/A 820M Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
• ASTM A 824 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
• ASTM A 847/A 847M Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Imp
• ASTM A 857/A 857M Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
• ASTM A 861 Standard Specification for High-Silicon Iron Pipe and Fittings
• ASTM A 865/A 865M Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, fo
• ASTM A 875/A 875M Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
• ASTM A 884/A 884M Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
• ASTM A 888 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Pip
• ASTM A 898/A 898M Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
• ASTM A 899 Standard Specification for Steel Wire, Epoxy-Coated
• ASTM A 913/A913M Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching an
• ASTM A 924/A 924M Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
• ASTM A 929/A 929M Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
• ASTM A 934/A 934M Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
• ASTM A 951/A 951M Standard Specification for Steel Wire for Masonry Joint Reinforcement
• ASTM A 955/A 955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
• ASTM A 959 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
• ASTM A 992/A 992M Standard Specification for Structural Steel Shapes
• ASTM A 996/A 996M Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
• ASTM A 1003/A 1003M Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Mem
• ASTM A 1008/A 1008M Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Stre
• ASTM A 1011/A 1011M Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy,
• ASTM B 1 Standard Specification for Hard-Drawn Copper Wire
• ASTM B 2 Standard Specification for Medium-Hard-Drawn Copper Wire
• ASTM B 3 Standard Specification for Soft or Annealed Copper Wire
• ASTM B 8 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
• ASTM B 16/B 16M Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
• ASTM B 19 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
• ASTM B 26/B 26M Standard Specification for Aluminum-Alloy Sand Castings
• ASTM B 29 Standard Specification for Refined Lead
• ASTM B 30 Standard Specification for Copper Alloys in Ingot Form
• ASTM B 32 Standard Specification for Solder Metal
• ASTM B 33 Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes
• ASTM B 36/B 36M Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
• ASTM B 42 Standard Specification for Seamless Copper Pipe, Standard Sizes
• ASTM B 43 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
• ASTM B 61 Standard Specification for Steam or Valve Bronze Castings
• ASTM B 62 Standard Specification for Composition Bronze or Ounce Metal Castings
• ASTM B 68 Standard Specification for Seamless Copper Tube, Bright Annealed
• ASTM B 68M Standard Specification for Seamless Copper Tube, Bright Annealed [Metric]
• ASTM B 69 Standard Specification for Rolled Zinc a
• ASTM B 75 Standard Specification for Seamless Copper Tube
• ASTM B 75M Standard Specification for Seamless Copper Tube [Metric]
• ASTM B 85 Standard Specification for Aluminum-Alloy Die Castings
• ASTM B 88 Standard Specification for Seamless Copper Water Tube
• ASTM B 88M Standard Specification for Seamless Copper Water Tube [Metric]
• ASTM B 101 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
• ASTM B 111/B 111M Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
• ASTM B 117 Standard Practice for Operating Salt Spray (Fog) Apparatus
• ASTM B 134/B 134M Standard Specification for Brass Wire
• ASTM B 135 Standard Specification for Seamless Brass Tube
• ASTM B 135M Standard Specification for Seamless Brass Tube [Metric]
• ASTM B 138/B 138M Standard Specification for Manganese Bronze Rod, Bar, and Shapes
• ASTM B 151/B 151M Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
• ASTM B 152/B 152M Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
• ASTM B 164 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
• ASTM B 169/B 169M Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
• ASTM B 177 Standard Guide for Engineering Chromium Electroplating
• ASTM B 179 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
• ASTM B 209 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
• ASTM B 209M Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
• ASTM B 210 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
• ASTM B 210M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
• ASTM B 211 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
• ASTM B 211M Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric]
• ASTM B 221 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
• ASTM B 221M Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
• ASTM B 227 Standard Specification for Hard-Drawn Copper-Clad Steel Wire
• ASTM B 228 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
• ASTM B 230/B 230M Standard Specification for Aluminum 1350H19 Wire for Electrical Purposes
• ASTM B 231/B 231M Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
• ASTM B 232/B 232M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
• ASTM B 241/B 241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
• ASTM B 244 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings
• ASTM B 247 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
• ASTM B 247M Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric
• ASTM B 249/B 249M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgi
• ASTM B 251 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
• ASTM B 251M Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]
• ASTM B 265 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate b
• ASTM B 280 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
• ASTM B 286 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
• ASTM B 302 Standard Specification for Threadless Copper Pipe, Standard Sizes
• ASTM B 306 Standard Specification for Copper Drainage Tube (DWV)
• ASTM B 308/B 308M Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
• ASTM B 316/B 316M Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
• ASTM B 348 Standard Specification for Titanium and Titanium Alloy Bars and Billets
• ASTM B 370 Standard Specification for Copper Sheet and Strip for Building Construction
• ASTM B 398/B 398M Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
• ASTM B 399/B 399M Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
• ASTM B 416 Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
• ASTM B 418 Standard Specification for Cast and Wrought Galvanic Zinc Anodes
• ASTM B 429/B 429M Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
• ASTM B 447 Standard Specification for Welded Copper Tube
• ASTM B 449 Standard Specification for Chromates on Aluminum
• ASTM B 455 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
• ASTM B 456 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
• ASTM B 483/B 483M Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications
• ASTM B 571 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
• ASTM B 584 Standard Specification for Copper Alloy Sand Castings for General Applications
• ASTM B 632/B 632M Standard Specification for Aluminum-Alloy Rolled Tread Plate
• ASTM B 633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
• ASTM B 660 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
• ASTM B 687 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
• ASTM B 695 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
• ASTM B 743 Standard Specification for Seamless Copper Tube in Coils
• ASTM B 745/B 745M Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
• ASTM B 749 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
• ASTM B 766 Standard Specification for Electrodeposited Coatings of Cadmium
• ASTM B 788/B 788M Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
• ASTM B 813 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
• ASTM B 819 Standard Specification for Seamless Copper Tube for Medical Gas Systems
• ASTM B 824 Standard Specification for General Requirements for Copper Alloy Castings
• ASTM B 828 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
• ASTM B 837 Standard Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Sy
• ASTM B 843 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
• ASTM C 4 Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile
• ASTM C 5 Standard Specification for Quicklime for Structural Purposes
• ASTM C 11 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
• ASTM C 12 Standard Practice for Installing Vitrified Clay Pipe Lines
• ASTM C 14 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
• ASTM C 14M Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe [Metric]
• ASTM C 22/C 22M Standard Specification for Gypsum
• ASTM C 27 Standard Classification of Fireclay and High-Alumina Refractory Brick
• ASTM C 28/C 28M Standard Specification for Gypsum Plasters
• ASTM C 29/C 29M Standard Test Method for Bulk Density (Unit Weight) and Voids in Aggregate
• ASTM C 31/C 31M Standard Practice for Making and Curing Concrete Test Specimens in the Field
• ASTM C 32 Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)
• ASTM C 33 Standard Specification for Concrete Aggregates
• ASTM C 34 Standard Specification for Structural Clay Load-Bearing Wall Tile
• ASTM C 35 Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
• ASTM C 39/C 39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
• ASTM C 42/C 42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
• ASTM C 55 Standard Specification for Concrete Building Brick
• ASTM C 56 Standard Specification for Structural Clay Nonloadbearing Tile
• ASTM C 59/C 59M Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
• ASTM C 61/C 61M Standard Specification for Gypsum Keene's Cement
• ASTM C 62 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
• ASTM C 67 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
• ASTM C 73 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)
• ASTM C 76 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
• ASTM C 76M Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric]
• ASTM C 78 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
• ASTM C 90 Standard Specification for Loadbearing Concrete Masonry Units b
• ASTM C 91 Standard Specification for Masonry Cement
• ASTM C 94/C 94M Standard Specification for Ready-Mixed Concrete
• ASTM C 97 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
• ASTM C 99 Standard Test Method for Modulus of Rupture of Dimension Stone
• ASTM C 109/C 109M Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specime
• ASTM C 114 Standard Test Methods for Chemical Analysis of Hydraulic Cement
• ASTM C 119 Standard Terminology Relating to Dimension Stone
• ASTM C 126 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
• ASTM C 127 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
• ASTM C 128 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
• ASTM C 129 Standard Specification for Nonloadbearing Concrete Masonry Units
• ASTM C 131 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los A
• ASTM C 136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
• ASTM C 138/C 138M Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
• ASTM C 140 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
• ASTM C 143/C 143M Standard Test Method for Slump of Hydraulic-Cement Concrete
• ASTM C 144 Standard Specification for Aggregate for Masonry Mortar
• ASTM C 150 Standard Specification for Portland Cement
• ASTM C 157/C 157M Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
• ASTM C 168 Standard Terminology Relating to Thermal Insulation
• ASTM C 170 Standard Test Method for Compressive Strength of Dimension Stone
• ASTM C 171 Standard Specification for Sheet Materials for Curing Concrete
• ASTM C 172 Standard Practice for Sampling Freshly Mixed Concrete
• ASTM C 173/C 173M Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
• ASTM C 177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guar
• ASTM C 185 Standard Test Method for Air Content of Hydraulic Cement Mortar
• ASTM C 188 Standard Test Method for Density of Hydraulic Cement
• ASTM C 195 Standard Specification for Mineral Fiber Thermal Insulating Cement
• ASTM C 196 Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
• ASTM C 199 Standard Test Method for Pier Test for Refractory Mortars
• ASTM C 206 Standard Specification for Finishing Hydrated Lime
• ASTM C 207 Standard Specification for Hydrated Lime for Masonry Purposes
• ASTM C 208 Standard Specification for Cellulosic Fiber Insulating Board
• ASTM C 209 Standard Test Methods for Cellulosic Fiber Insulating Board
• ASTM C 212 Standard Specification for Structural Clay Facing Tile
• ASTM C 215 Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specime
• ASTM C 216 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
• ASTM C 219 Standard Terminology Relating to Hydraulic Cement
• ASTM C 231 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
• ASTM C 240 Standard Test Methods of Testing Cellular Glass Insulation Block
• ASTM C 241 Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
• ASTM C 242 Standard Terminology of Ceramic Whitewares and Related Products
• ASTM C 260 Standard Specification for Air-Entraining Admixtures for Concrete
• ASTM C 266 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
• ASTM C 267 Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
• ASTM C 270 Standard Specification for Mortar for Unit Masonry
• ASTM C 272 Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions
• ASTM C 279 Standard Specification for Chemical-Resistant Masonry Units
• ASTM C 287 Standard Specification for Chemical-Resistant Sulfur Mortar
• ASTM C 293 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
• ASTM C 296 Standard Specification for Asbestos-Cement Pressure Pipe
• ASTM C 297/C 297M Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
• ASTM C 303 Standard Test Method for Dimensions and Density of Preformed Block and BoardType Thermal Insulation
• ASTM C 307 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
• ASTM C 308 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mo
• ASTM C 309 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
• ASTM C 315 Standard Specification for Clay Flue Liners and Chimney Pots
• ASTM C 317/C 317M Standard Specification for Gypsum Concrete
• ASTM C 321 Standard Test Method for Bond Strength of Chemical-Resistant Mortars
• ASTM C 330 Standard Specification for Lightweight Aggregates for Structural Concrete
• ASTM C 331 Standard Specification for Lightweight Aggregates for Concrete Masonry Units
• ASTM C 332 Standard Specification for Lightweight Aggregates for Insulating Concrete
• ASTM C 335 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
• ASTM C 348 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
• ASTM C 365/C 365M Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
• ASTM C 373 Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Wh
• ASTM C 384 Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
• ASTM C 386 Standard Practice for Use of Chemical-Resistant Sulfur Mortar
• ASTM C 387/C 387M Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
• ASTM C 393/C 393M Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
• ASTM C 395 Standard Specification for Chemical-Resistant Resin Mortars
• ASTM C 397 Standard Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
• ASTM C 398 Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry
• ASTM C 399 Standard Practice for Use of Chemical-Resistant Resin Mortars
• ASTM C 401 Standard Classification of Alumina and Alumina-Silicate Castable Refractories
• ASTM C 404 Standard Specification for Aggregates for Masonry Grout
• ASTM C 406 Standard Specification for Roofing Slate
• ASTM C 410 Standard Specification for Industrial Floor Brick
• ASTM C 411 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
• ASTM C 412 Standard Specification for Concrete Drain Tile
• ASTM C 412M Standard Specification for Concrete Drain Tile [Metric]
• ASTM C 413 Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concret
• ASTM C 423 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
• ASTM C 425 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
• ASTM C 428 Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe
• ASTM C 443 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
• ASTM C 443M Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets [Metric]
• ASTM C 444 Standard Specification for Perforated Concrete Pipe
• ASTM C 444M Standard Specification for Perforated Concrete Pipe [Metric]
• ASTM C 449/C 449M Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
• ASTM C 450 Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
• ASTM C 452 Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
• ASTM C 466 Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars
• ASTM C 472 Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
• ASTM C 473 Standard Test Methods for Physical Testing of Gypsum Panel Products
• ASTM C 474 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
• ASTM C 475/C 475M Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
• ASTM C 476 Standard Specification for Grout for Masonry
• ASTM C 478 Standard Specification for Precast Reinforced Concrete Manhole Sections
• ASTM C 478M Standard Specification for Precast Reinforced Concrete Manhole Sections [Metric]
• ASTM C 481 Standard Test Method for Laboratory Aging of Sandwich Constructions
• ASTM C 482 Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
• ASTM C 485 Standard Test Method for Measuring Warpage of Ceramic Tile
• ASTM C 494/C 494M Standard Specification for Chemical Admixtures for Concrete
• ASTM C 495 Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
• ASTM C 496/C 496M Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
• ASTM C 499 Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile
• ASTM C 501 Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
• ASTM C 502 Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile
• ASTM C 503 Standard Specification for Marble Dimension Stone
• ASTM C 508 Standard Specification for Asbestos-Cement Underdrain Pipe
• ASTM C 509 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
• ASTM C 514 Standard Specification for Nails for the Application of Gypsum Board
• ASTM C 516 Standard Specification for Vermiculite Loose Fill Thermal Insulation
• ASTM C 518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
• ASTM C 520 Standard Test Methods for Density of Granular Loose Fill Insulations
• ASTM C 530 Standard Specification for Structural Clay Nonloadbearing Screen Tile
• ASTM C 531 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts,
• ASTM C 533 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation
• ASTM C 534 Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
• ASTM C 542 Standard Specification for Lock-Strip Gaskets
• ASTM C 547 Standard Specification for Mineral Fiber Pipe Insulation
• ASTM C 549 Standard Specification for Perlite Loose Fill Insulation
• ASTM C 552 Standard Specification for Cellular Glass Thermal Insulation
• ASTM C 553 Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
• ASTM C 557 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
• ASTM C 564 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
• ASTM C 567 Standard Test Method for Determining Density of Structural Lightweight Concrete
• ASTM C 568 Standard Specification for Limestone Dimension Stone
• ASTM C 578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
• ASTM C 579 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Poly
• ASTM C 580 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithi
• ASTM C 585 Standard Practice for Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing (NPS
• ASTM C 587 Standard Specification for Gypsum Veneer Plaster
• ASTM C 591 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
• ASTM C 592 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (In
• ASTM C 595 Standard Specification for Blended Hydraulic Cements
• ASTM C 596 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
• ASTM C 602 Standard Specification for Agricultural Liming Materials
• ASTM C 610 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
• ASTM C 612 Standard Specification for Mineral Fiber Block and Board Thermal Insulation
• ASTM C 615 Standard Specification for Granite Dimension Stone
• ASTM C 616 Standard Specification for Quartz-Based Dimension Stone
• ASTM C 618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
• ASTM C 627 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
• ASTM C 629 Standard Specification for Slate Dimension Stone
• ASTM C 631 Standard Specification for Bonding Compounds for Interior Gypsum Plastering a
• ASTM C 635/C 635M Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustica
• ASTM C 636/C 636M Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
• ASTM C 642 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
• ASTM C 645 Standard Specification for Nonstructural Steel Framing Members
• ASTM C 648 Standard Test Method for Breaking Strength of Ceramic Tile
• ASTM C 652 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
• ASTM C 654 Standard Specification for Porous Concrete Pipe
• ASTM C 654M Standard Specification for Porous Concrete Pipe [Metric]
• ASTM C 658 Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile
• ASTM C 665 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Hou
• ASTM C 666/C 666M Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
• ASTM C 672/C 672M Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
• ASTM C 685/C 685M Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
• ASTM C 700 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
• ASTM C 711 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Seal
• ASTM C 716 Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
• ASTM C 719 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
• ASTM C 723 Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile
• ASTM C 726 Standard Specification for Mineral Fiber Roof Insulation Board
• ASTM C 728 Standard Specification for Perlite Thermal Insulation Board
• ASTM C 739 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation b
• ASTM C 744 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units
• ASTM C 754 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
• ASTM C 755 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
• ASTM C 764 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
• ASTM C 780 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
• ASTM C 793 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
• ASTM C 794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
• ASTM C 795 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
• ASTM C 802 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Const
• ASTM C 811 Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacin
• ASTM C 834 Standard Specification for Latex Sealants
• ASTM C 836 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with S
• ASTM C 840 Standard Specification for Application and Finishing of Gypsum Board
• ASTM C 841 Standard Specification for Installation of Interior Lathing and Furring
• ASTM C 842 Standard Specification for Application of Interior Gypsum Plaster
• ASTM C 843 Standard Specification for Application of Gypsum Veneer Plaster
• ASTM C 844 Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
• ASTM C 845 Standard Specification for Expansive Hydraulic Cement
• ASTM C 846 Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
• ASTM C 847 Standard Specification for Metal Lath
• ASTM C 857 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
• ASTM C 858 Standard Specification for Underground Precast Concrete Utility Structures
• ASTM C 864 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
• ASTM C 869 Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete
• ASTM C 871 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicat
• ASTM C 880 Standard Test Method for Flexural Strength of Dimension Stone
• ASTM C 881/C 881M Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
• ASTM C 882 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
• ASTM C 887 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
• ASTM C 890 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastew
• ASTM C 891 Standard Practice for Installation of Underground Precast Concrete Utility Structures
• ASTM C 897 Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
• ASTM C 898 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Separate W
• ASTM C 901 Standard Specification for Prefabricated Masonry Panels
• ASTM C 902 Standard Specification for Pedestrian and Light Traffic Paving Brick
• ASTM C 905 Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer
• ASTM C 913 Standard Specification for Precast Concrete Water and Wastewater Structures
• ASTM C 916 Standard Specification for Adhesives for Duct Thermal Insulation
• ASTM C 919 Standard Practice for Use of Sealants in Acoustical Applications
• ASTM C 920 Standard Specification for Elastomeric Joint Sealants
• ASTM C 921 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
• ASTM C 923 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals
• ASTM C 923M Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals
• ASTM C 924 Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
• ASTM C 924M Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method [Metric]
• ASTM C 926 Standard Specification for Application of Portland Cement-Based Plaster
• ASTM C 928 Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
• ASTM C 932 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering
• ASTM C 933 Standard Specification for Welded Wire Lath
• ASTM C 936 Standard Specification for Solid Concrete Interlocking Paving Units
• ASTM C 937 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
• ASTM C 938 Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
• ASTM C 942 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
• ASTM C 944 Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
• ASTM C 946 Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls
• ASTM C 947 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With
• ASTM C 948 Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-
• ASTM C 954 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to
• ASTM C 955 Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging
• ASTM C 956 Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
• ASTM C 957 Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral
• ASTM C 969 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
• ASTM C 969M Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Line
• ASTM C 977 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
• ASTM C 979 Standard Specification for Pigments for Integrally Colored Concrete
• ASTM C 989 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
• ASTM C 990 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Join
• ASTM C 990M Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joi
• ASTM C 991 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings
• ASTM C 1002 Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal
• ASTM C 1006 Standard Test Method for Splitting Tensile Strength of Masonry Units
• ASTM C 1007 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
• ASTM C 1014 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
• ASTM C 1015 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
• ASTM C 1017/C 1017M Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
• ASTM C 1019 Standard Test Method for Sampling and Testing Grout
• ASTM C 1021 Standard Practice for Laboratories Engaged in Testing of Building Sealants
• ASTM C 1029 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
• ASTM C 1032 Standard Specification for Woven Wire Plaster Base
• ASTM C 1036 Standard Specification for Flat Glass
• ASTM C 1037 Standard Practice for Inspection of Underground Precast Concrete Utility Structures
• ASTM C 1045 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
• ASTM C 1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
• ASTM C 1048 Standard Specification for Heat-Treated Flat GlassKind HS, Kind FT Coated and Uncoated Glass
• ASTM C 1053 Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications
• ASTM C 1059 Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete
• ASTM C 1063 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Base
• ASTM C 1064/C 1064M Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
• ASTM C 1071 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
• ASTM C 1072 Standard Test Method for Measurement of Masonry Flexural Bond Strength
• ASTM C 1077 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for
• ASTM C 1086 Standard Specification for Glass Fiber Felt Thermal Insulation
• ASTM C 1087 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Gl
• ASTM C 1088 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
• ASTM C 1093 Standard Practice for Accreditation of Testing Agencies for Masonry
• ASTM C 1104/C 1104M Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
• ASTM C 1107/C 1107M Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
• ASTM C 1115 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
• ASTM C 1116/C 1116M Standard Specification for Fiber-Reinforced Concrete
• ASTM C 1126 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
• ASTM C 1127 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integr
• ASTM C 1136 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
• ASTM C 1140 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
• ASTM C 1141 Standard Specification for Admixtures for Shotcrete
• ASTM C 1142 Standard Specification for Extended Life Mortar for Unit Masonry
• ASTM C 1149 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
• ASTM C 1157 Standard Performance Specification for Hydraulic Cement
• ASTM C 1158 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Building Construction
• ASTM C 1167 Standard Specification for Clay Roof Tiles
• ASTM C 1172 Standard Specification for Laminated Architectural Flat Glass
• ASTM C 1173 Standard Specification for Flexible Transition Couplings for Underground Piping Systems
• ASTM C 1177/C 1177M Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
• ASTM C 1178/C 1178M Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel
• ASTM C 1184 Standard Specification for Structural Silicone Sealants
• ASTM C 1185 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, an
• ASTM C 1186 Standard Specification for Flat Non-Asbestos Fiber-Cement Sheets
• ASTM C 1193 Standard Guide for Use of Joint Sealants
• ASTM C 1194 Standard Test Method for Compressive Strength of Architectural Cast Stone
• ASTM C 1195 Standard Test Method for Absorption of Architectural Cast Stone
• ASTM C 1199 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Meth
• ASTM C 1201 Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air P
• ASTM C 1202 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
• ASTM C 1218/C 1218M Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
• ASTM C 1227 Standard Specification for Precast Concrete Septic Tanks c
• ASTM C 1228 Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
• ASTM C 1229 Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Te
• ASTM C 1230 Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
• ASTM C 1240 Standard Specification for Silica Fume Used in Cementitious Mixtures
• ASTM C 1242 Standard Guide for Selection, Design, and Installation of Dimension Stone Anchoring Systems
• ASTM C 1247 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
• ASTM C 1248 Standard Test Method for Staining of Porous Substrate by Joint Sealants
• ASTM C 1249 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
• ASTM C 1250 Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes
• ASTM C 1253 Standard Test Method for Determining the Outgassing Potential of Sealant Backing
• ASTM C 1261 Standard Specification for Firebox Brick for Residential Fireplaces
• ASTM C 1272 Standard Specification for Heavy Vehicular Paving Brick
• ASTM C 1276 Standard Test Method for Measuring the Viscosity of Mold Powders Above Their Melting Point Using a Rotational Viscom
• ASTM C 1277 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
• ASTM C 1278/C 1278M Standard Specification for Fiber-Reinforced Gypsum Panel
• ASTM C 1280 Standard Specification for Application of Gypsum Sheathing
• ASTM C 1281 Standard Specification for Preformed Tape Sealants for Glazing Applications
• ASTM C 1283 Standard Practice for Installing Clay Flue Lining
• ASTM C 1288 Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets
• ASTM C 1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
• ASTM C 1290 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
• ASTM C 1293 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
• ASTM C 1311 Standard Specification for Solvent Release Sealants
• ASTM C 1313 Standard Specification for Sheet Radiant Barriers for Building Construction Applications
• ASTM C 1314 Standard Test Method for Compressive Strength of Masonry Prisms
• ASTM C 1315 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concre
• ASTM C 1320 Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
• ASTM C 1321 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Constru
• ASTM C 1325 Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cement Substrate Sheets
• ASTM C 1328 Standard Specification for Plastic (Stucco) Cement
• ASTM C 1329 Standard Specification for Mortar Cement
• ASTM C 1330 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
• ASTM C 1353 Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
• ASTM C 1354 Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone
• ASTM C 1363 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box App
• ASTM C 1364 Standard Specification for Architectural Cast Stone
• ASTM C 1371 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
• ASTM C 1382 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Fi
• ASTM C 1386 Standard Specification for Precast Autoclaved Aerated Concrete (AAC) Wall Construction Units
• ASTM C 1396/C 1396M Standard Specification for Gypsum Board
• ASTM C 1397 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems
• ASTM C 1401 Standard Guide for Structural Sealant Glazing
• ASTM C 1405 Standard Specification for Glazed Brick (Single Fired, Brick Units)
• ASTM C 1422 Standard Specification for Chemically Strengthened Flat Glass
• ASTM C 1427 Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
• ASTM C 1440 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer,
• ASTM C 1460 Standard Specification for Shielded Transition Couplings for Use With Dissimilar DWV Pipe and Fittings Above Ground
• ASTM C 1461 Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Was
• ASTM C 1464 Standard Specification for Bent Glass
• ASTM C 1467/C 1467M Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts
• ASTM C 1479 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installat
• ASTM C 1481 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
• ASTM C 1491 Standard Specification for Concrete Roof Pavers
• ASTM C 1492 Standard Specification for Concrete Roof Tile
• ASTM C 1503 Standard Specification for Silvered Flat Glass Mirror
• ASTM C 1513 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
• ASTM C 1526 Standard Specification for Serpentine Dimension Stone
• ASTM C 1527 Standard Specification for Travertine Dimension Stone
• ASTM C 1540 Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
• ASTM C 1563 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sani
• ASTM D 5 Standard Test Method for Penetration of Bituminous Materials
• ASTM D 8 Standard Terminology Relating to Materials for Roads and Pavements
• ASTM D 16 Standard Terminology for Paint, Related Coatings, Materials, and Applications
• ASTM D 25 Standard Specification for Round Timber Piles
• ASTM D 36 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
• ASTM D 41 Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing
• ASTM D 43 Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing
• ASTM D 56 Standard Test Method for Flash Point by Tag Closed Cup Tester
• ASTM D 70 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
• ASTM D 71 Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
• ASTM D 75 Standard Practice for Sampling Aggregates
• ASTM D 86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
• ASTM D 87 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
• ASTM D 92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
• ASTM D 113 Standard Test Method for Ductility of Bituminous Materials
• ASTM D 117 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin
• ASTM D 140 Standard Practice for Sampling Bituminous Materials
• ASTM D 143 Standard Test Methods for Small Clear Specimens of Timber
• ASTM D 146 Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofin
• ASTM D 149 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Material
• ASTM D 173 Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing
• ASTM D 198 Standard Test Methods of Static Tests of Lumber in Structural Sizes
• ASTM D 217 Standard Test Methods for Cone Penetration of Lubricating Grease
• ASTM D 225 Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
• ASTM D 226 Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
• ASTM D 227 Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
• ASTM D 228 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in R
• ASTM D 242 Standard Specification for Mineral Filler For Bituminous Paving Mixtures
• ASTM D 245 Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber
• ASTM D 256 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
• ASTM D 312 Standard Specification for Asphalt Used in Roofing
• ASTM D 323 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
• ASTM D 395 Standard Test Methods for Rubber PropertyCompression Set
• ASTM D 396 Standard Specification for Fuel Oils
• ASTM D 412 Standard Test Methods for Vulcanized Rubber and Thermoplastic ElastomersTension
• ASTM D 413 Standard Test Methods for Rubber PropertyAdhesion to Flexible Substrate
• ASTM D 422 Standard Test Method for Particle-Size Analysis of Soils
• ASTM D 429 Standard Test Methods for Rubber PropertyAdhesion to Rigid Substrates
• ASTM D 448 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
• ASTM D 449 Standard Specification for Asphalt Used in Dampproofing and Waterproofing
• ASTM D 450 Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing
• ASTM D 471 Standard Test Method for Rubber PropertyEffect of Liquids
• ASTM D 522 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings a
• ASTM D 523 Standard Test Method for Specular Gloss
• ASTM D 543 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
• ASTM D 546 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
• ASTM D 558 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
• ASTM D 570 Standard Test Method for Water Absorption of Plastics
• ASTM D 573 Standard Test Method for RubberDeterioration in an Air Oven
• ASTM D 578 Standard Specification for Glass Fiber Strands
• ASTM D 618 Standard Practice for Conditioning Plastics for Testing
• ASTM D 624 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
• ASTM D 635 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
• ASTM D 638 Standard Test Method for Tensile Properties of Plastics
• ASTM D 648 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
• ASTM D 668 Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
• ASTM D 692 Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures
• ASTM D 695 Standard Test Method for Compressive Properties of Rigid Plastics
• ASTM D 696 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between _30C and 30C with a Vitreous Sil
• ASTM D 698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft (600
• ASTM D 709 Standard Specification for Laminated Thermosetting Materials
• ASTM D 714 Standard Test Method for Evaluating Degree of Blistering of Paints
• ASTM D 732 Standard Test Method for Shear Strength of Plastics by Punch Tool
• ASTM D 746 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
• ASTM D 747 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
• ASTM D 751 Standard Test Methods for Coated Fabrics
• ASTM D 785 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
• ASTM D 790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Mater
• ASTM D 792 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
• ASTM D 816 Standard Test Methods for Rubber Cements
• ASTM D 822 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
• ASTM D 832 Standard Practice for Rubber Conditioning For Low Temperature Testing
• ASTM D 854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
• ASTM D 859 Standard Test Method for Silica in Water
• ASTM D 870 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
• ASTM D 882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
• ASTM D 903 Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
• ASTM D 905 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
• ASTM D 946 Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction
• ASTM D 950 Standard Test Method for Impact Strength of Adhesive Bonds
• ASTM D 952 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
• ASTM D 968 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
• ASTM D 975 Standard Specification for Diesel Fuel Oils b
• ASTM D 977 Standard Specification for Emulsified Asphalt
• ASTM D 979 Standard Practice for Sampling Bituminous Paving Mixtures
• ASTM D 994 Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
• ASTM D 1000 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
• ASTM D 1002 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Lo
• ASTM D 1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
• ASTM D 1004 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
• ASTM D 1037 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
• ASTM D 1044 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
• ASTM D 1056 Standard Specification for Flexible Cellular MaterialsSponge or Expanded Rubber
• ASTM D 1066 Standard Practice for Sampling Steam
• ASTM D 1067 Standard Test Methods for Acidity or Alkalinity of Water
• ASTM D 1068 Standard Test Methods for Iron in Water
• ASTM D 1073 Standard Specification for Fine Aggregate for Bituminous Paving Mixtures
• ASTM D 1079 Standard Terminology Relating to Roofing and Waterproofing
• ASTM D 1126 Standard Test Method for Hardness in Water
• ASTM D 1129 Standard Terminology Relating to Water
• ASTM D 1143 81 Standard Test Method for Piles Under Static Axial Compressive Load
• ASTM D 1149 Standard Test Methods for Rubber DeteriorationCracking in an Ozone Controlled Environment
• ASTM D 1171 Standard Test Method for Rubber DeteriorationSurface Ozone Cracking Outdoors or Chamber (Triangular Specimens)
• ASTM D 1183 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
• ASTM D 1187 Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal
• ASTM D 1188 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
• ASTM D 1203 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
• ASTM D 1204 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperatu
• ASTM D 1227 Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing
• ASTM D 1238 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer c
• ASTM D 1248 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
• ASTM D 1308 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
• ASTM D 1327 Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing
• ASTM D 1335 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings
• ASTM D 1360 Standard Test Method for Fire Retardancy of Paints (Cabinet Method)
• ASTM D 1413 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
• ASTM D 1414 Standard Test Methods for Rubber O-Rings
• ASTM D 1435 Standard Practice for Outdoor Weathering of Plastics
• ASTM D 1475 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
• ASTM D 1494 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
• ASTM D 1499 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
• ASTM D 1505 Standard Test Method for Density of Plastics by the Density-Gradient Technique
• ASTM D 1527 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
• ASTM D 1556 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
• ASTM D 1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft(2,70
• ASTM D 1586 Standard Test Method for Penetration Test and Split-Barrel Sampling of Soils
• ASTM D 1593 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
• ASTM D 1600 Standard Terminology for Abbreviated Terms Relating to Plastics
• ASTM D 1603 Standard Test Method for Carbon Black Content in Olefin Plastics
• ASTM D 1621 Standard Test Method for Compressive Properties Of Rigid Cellular Plastics
• ASTM D 1622 Standard Test Method for Apparent Density of Rigid Cellular Plastics
• ASTM D 1623 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
• ASTM D 1633 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
• ASTM D 1644 Standard Test Methods for Nonvolatile Content of Varnishes
• ASTM D 1653 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
• ASTM D 1654 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
• ASTM D 1667 Standard Specification for Flexible Cellular MaterialsPoly (Vinyl Chloride) Foam (Closed-Cell)
• ASTM D 1668 Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing a
• ASTM D 1693 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
• ASTM D 1709 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
• ASTM D 1730 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
• ASTM D 1735 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
• ASTM D 1751 Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextr
• ASTM D 1752 Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving
• ASTM D 1754 Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
• ASTM D 1761 Standard Test Methods for Mechanical Fasteners in Wood
• ASTM D 1777 Standard Test Method for Thickness of Textile Materials
• ASTM D 1781 Standard Test Method for Climbing Drum Peel for Adhesives
• ASTM D 1784 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Co
• ASTM D 1785 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
• ASTM D 1822 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
• ASTM D 1856 Standard Test Method for Recovery of Asphalt From Solution by Abson Method) a
• ASTM D 1863 Standard Specification for Mineral Aggregate Used on Built-Up Roofs
• ASTM D 1869 Standard Specification for Rubber Rings for Asbestos-Cement Pipe
• ASTM D 1876 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
• ASTM D 1929 Standard Test Method for Determining Ignition Temperature of Plastics
• ASTM D 1970 Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlaym
• ASTM D 1998 Standard Specification for Polyethylene Upright Storage Tanks
• ASTM D 2000 Standard Classification System for Rubber Products in Automotive Applications
• ASTM D 2027 Standard Specification for Cutback Asphalt (Medium-Curing Type)
• ASTM D 2028 Standard Specification for Cutback Asphalt (Rapid-Curing Type)
• ASTM D 2041 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
• ASTM D 2042 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
• ASTM D 2047 Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James
• ASTM D 2103 Standard Specification for Polyethylene Film and Sheeting
• ASTM D 2104 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40
• ASTM D 2126 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
• ASTM D 2136 Standard Test Method for Coated FabricsLow-Temperature Bend Test
• ASTM D 2137 Standard Test Methods for Rubber PropertyBrittleness Point of Flexible Polymers and Coated Fabrics
• ASTM D 2166 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
• ASTM D 2167 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
• ASTM D 2170 Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens) a
• ASTM D 2171 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
• ASTM D 2172 Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
• ASTM D 2178 Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
• ASTM D 2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
• ASTM D 2235 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
• ASTM D 2239 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
• ASTM D 2240 Standard Test Method for Rubber PropertyDurometer Hardness
• ASTM D 2241 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
• ASTM D 2244 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coord
• ASTM D 2247 Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
• ASTM D 2248 Standard Practice for Detergent Resistance of Organic Finishes a
• ASTM D 2261 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extensio
• ASTM D 2287 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
• ASTM D 2310 Standard Classification for Machine-Made Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
• ASTM D 2321 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
• ASTM D 2370 Standard Test Method for Tensile Properties of Organic Coatings
• ASTM D 2394 Standard Test Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring
• ASTM D 2397 Standard Specification for Cationic Emulsified Asphalt
• ASTM D 2412 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
• ASTM D 2419 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
• ASTM D 2434 Standard Test Method for Permeability of Granular Soils (Constant Head)
• ASTM D 2447 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter
• ASTM D 2464 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
• ASTM D 2466 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
• ASTM D 2467 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
• ASTM D 2482 Standard Test Method for Surface Strength of Paper (Wax Pick Method)
• ASTM D 2486 Standard Test Methods for Scrub Resistance of Wall Paints
• ASTM D 2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
• ASTM D 2513 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
• ASTM D 2517 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
• ASTM D 2559 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposur
• ASTM D 2564 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
• ASTM D 2565 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
• ASTM D 2581 Standard Classification System for Polybutylene (PB) Plastics Molding and Extrusion Materials
• ASTM D 2582 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
• ASTM D 2583 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
• ASTM D 2609 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
• ASTM D 2626 Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
• ASTM D 2628 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
• ASTM D 2632 Standard Test Method for Rubber PropertyResilience by Vertical Rebound
• ASTM D 2646 Standard Test Methods for Backing Fabric Characteristics of Pile Yarn Floor Coverings
• ASTM D 2657 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
• ASTM D 2661 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and
• ASTM D 2665 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
• ASTM D 2672 Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement a
• ASTM D 2680 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Pipi
• ASTM D 2683 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and T
• ASTM D 2697 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
• ASTM D 2726 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
• ASTM D 2729 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
• ASTM D 2737 Standard Specification for Polyethylene (PE) Plastic Tubing
• ASTM D 2751 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
• ASTM D 2774 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
• ASTM D 2794 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
• ASTM D 2805 Standard Test Method for Hiding Power of Paints by Reflectometry a
• ASTM D 2822 Standard Specification for Asphalt Roof Cement, Asbestos-Containing
• ASTM D 2823 Standard Specification for Asphalt Roof Coatings, Asbestos-Containing
• ASTM D 2824 Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, and Fibered witho
• ASTM D 2837 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basi
• ASTM D 2842 Standard Test Method for Water Absorption of Rigid Cellular Plastics
• ASTM D 2843 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
• ASTM D 2846/D 2846M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution
• ASTM D 2850 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils a
• ASTM D 2855 Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
• ASTM D 2859 Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials
• ASTM D 2872 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
• ASTM D 2898 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
• ASTM D 2937 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
• ASTM D 2939 Standard Test Methods for Emulsified Bitumens Used as Protective Coatings
• ASTM D 2940 Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports
• ASTM D 2949 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe
• ASTM D 2950 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
• ASTM D 2980 Standard Test Method for Volume Mass, Moisture-Holding Capacity, and Porocity of Saturated Peat Materials
• ASTM D 2996 Standard Specification for Filament-Wound Fiberglass'' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
• ASTM D 2997 Standard Specification for Centrifugally Cast Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
• ASTM D 3018 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
• ASTM D 3019 Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non Fibered, Asbestos Fibered, and Non Asbesto
• ASTM D 3034 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
• ASTM D 3035 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
• ASTM D 3045 Standard Practice for Heat Aging of Plastics Without Load
• ASTM D 3138 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and P
• ASTM D 3139 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
• ASTM D 3141 Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
• ASTM D 3161 Standard Test Method for Wind-Resistance of Asphalt Shingles (Fan-Induced Method)
• ASTM D 3170 Standard Test Method for Chipping Resistance of Coatings
• ASTM D 3200 Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Po
• ASTM D 3201 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
• ASTM D 3212 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals a
• ASTM D 3222 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
• ASTM D 3261 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe an
• ASTM D 3262 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
• ASTM D 3273 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chambe
• ASTM D 3274 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Gr
• ASTM D 3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
• ASTM D 3299 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
• ASTM D 3309 Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems a
• ASTM D 3311 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
• ASTM D 3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
• ASTM D 3359 Standard Test Methods for Measuring Adhesion by Tape Test
• ASTM D 3363 Standard Test Method for Film Hardness by Pencil Test
• ASTM D 3370 Standard Practices for Sampling Water from Closed Conduits a
• ASTM D 3381 Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
• ASTM D 3389 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
• ASTM D 3406 Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements
• ASTM D 3462 Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
• ASTM D 3468 Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofi
• ASTM D 3487 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
• ASTM D 3498 Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems
• ASTM D 3515 Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
• ASTM D 3517 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
• ASTM D 3542 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
• ASTM D 3549 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
• ASTM D 3574 Standard Test Methods for Flexible Cellular MaterialsSlab, Bonded, and Molded Urethane Foams
• ASTM D 3575 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
• ASTM D 3597 Standard Performance Specification for Woven Upholstery FabricsPlain, Tufted, or Flocked
• ASTM D 3617 Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application
• ASTM D 3656 Standard Specification for Insect Screening and Louver Cloth Woven from Vinyl-Coated Glass Yarns
• ASTM D 3666 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
• ASTM D 3676 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
• ASTM D 3679 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
• ASTM D 3737 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
• ASTM D 3740 Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as
• ASTM D 3746 Standard Test Method for Impact Resistance of Bituminous Roofing Systems
• ASTM D 3747 Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation
• ASTM D 3753 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells
• ASTM D 3754 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pip
• ASTM D 3776 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
• ASTM D 3828 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
• ASTM D 3839 Standard Guide for Underground Installation of Fiberglass (Glass-FiberReinforced Thermosetting-Resin) Pipe
• ASTM D 3840 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure App
• ASTM D 3841 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
• ASTM D 3909 Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules
• ASTM D 3910 Standard Practices for Design, Testing, and Construction of Slurry Seal
• ASTM D 3936 Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering
• ASTM D 3960 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
• ASTM D 3963/D 3963M Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
• ASTM D 3965 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
• ASTM D 4022 Standard Specification for Coal Tar Roof Cement, Asbestos Containing
• ASTM D 4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
• ASTM D 4065 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
• ASTM D 4068 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
• ASTM D 4078 Standard Specification for Water Emulsion Floor Polish
• ASTM D 4097 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
• ASTM D 4101 Standard Specification for Polypropylene Injection and Extrusion Materials
• ASTM D 4145 Standard Test Method for Coating Flexibility of Prepainted Sheet
• ASTM D 4161 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elasto
• ASTM D 4214 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
• ASTM D 4216 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CP
• ASTM D 4226 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
• ASTM D 4258 Standard Practice for Surface Cleaning Concrete for Coating
• ASTM D 4259 Standard Practice for Abrading Concrete
• ASTM D 4260 Standard Practice for Liquid and Gelled Acid Etching of Concrete
• ASTM D 4261 Standard Practice for Surface Cleaning Concrete Masonry Units for Coating
• ASTM D 4263 Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
• ASTM D 4272 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
• ASTM D 4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
• ASTM D 4355 Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Ap
• ASTM D 4397 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
• ASTM D 4434 Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
• ASTM D 4437 Standard Practice for Determining the Integrity of Field Seams Used in Joining Flexible Polymeric Sheet Geomembranes
• ASTM D 4442 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
• ASTM D 4444 Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters
• ASTM D 4477 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
• ASTM D 4479 Standard Specification for Asphalt Roof CoatingsAsbestos-Free
• ASTM D 4491 Standard Test Methods for Water Permeability of Geotextiles by Permittivity a
• ASTM D 4533 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
• ASTM D 4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
• ASTM D 4551 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane
• ASTM D 4561 Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials
• ASTM D 4585 Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
• ASTM D 4586 Standard Specification for Asphalt Roof Cement, Asbestos-Free
• ASTM D 4595 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
• ASTM D 4601 Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
• ASTM D 4632 Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
• ASTM D 4637 Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
• ASTM D 4716 Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic U
• ASTM D 4726 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows a
• ASTM D 4751 Standard Test Method for Determining Apparent Opening Size of a Geotextile
• ASTM D 4756 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit
• ASTM D 4759 Standard Practice for Determining the Specification Conformance of Geosynthetics
• ASTM D 4802 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
• ASTM D 4829 Standard Test Method for Expansion Index of Soils
• ASTM D 4833 Standard Test Method for Index Puncture Resistance of Geotextiles, Geomembranes, and Related Products
• ASTM D 4869 Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing
• ASTM D 4873 Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples
• ASTM D 4897 Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
• ASTM D 4945 Standard Test Method for High-Strain Dynamic Testing of Piles
• ASTM D 4976 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
• ASTM D 4977 Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
• ASTM D 4990 Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing a
• ASTM D 5019 Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane
• ASTM D 5034 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
• ASTM D 5035 Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
• ASTM D 5036 Standard Practice for Application of Adhered Poly(Vinyl Chloride) Sheet Roofing
• ASTM D 5055 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
• ASTM D 5082 Standard Practice for Application of Mechanically Attached Poly(Vinyl Chloride) Sheet Roofing
• ASTM D 5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall
• ASTM D 5095 Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends U
• ASTM D 5116 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Produ
• ASTM D 5206 Standard Test Method for Windload Resistance of Rigid Plastic Siding
• ASTM D 5249 Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Conc
• ASTM D 5261 Standard Test Method for Measuring Mass per Unit Area of Geotextiles
• ASTM D 5262 Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics
• ASTM D 5268 Standard Specification for Topsoil Used for Landscaping Purposes
• ASTM D 5321 Standard Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Frict
• ASTM D 5385 Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes
• ASTM D 5420 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falli
• ASTM D 5421 Standard Specification for Contact Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
• ASTM D 5456 Standard Specification for Evaluation of Structural Composite Lumber Products
• ASTM D 5469 Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems
• ASTM D 5516 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to El
• ASTM D 5572 Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
• ASTM D 5596 Standard Test Method For Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
• ASTM D 5643 Standard Specification for Coal Tar Roof Cement, Asbestos Free
• ASTM D 5664 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength P
• ASTM D 5665 Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing a
• ASTM D 5685 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
• ASTM D 5703 Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry
• ASTM D 5726 Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing
• ASTM D 5751 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
• ASTM D 5843 Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing
• ASTM D 5893 Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cem
• ASTM D 5926 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, an
• ASTM D 5933 Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions
• ASTM D 5957 Standard Guide for Flood Testing Horizontal Waterproofing Installations
• ASTM D 6083 Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
• ASTM D 6098 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
• ASTM D 6108 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
• ASTM D 6109 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
• ASTM D 6110 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
• ASTM D 6111 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
• ASTM D 6134 Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems
• ASTM D 6135 Standard Practice for Application of Self-Adhering Modified Bituminous Waterproofing
• ASTM D 6152 Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing
• ASTM D 6162 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination o
• ASTM D 6163 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Rei
• ASTM D 6164 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinf
• ASTM D 6221 Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing
• ASTM D 6222 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforce
• ASTM D 6223 Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Po
• ASTM D 6298 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a F
• ASTM D 6305 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof
• ASTM D 6380 Standard Specification for Asphalt Roll Roofing (Organic Felt)
• ASTM D 6637 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
• ASTM D 6690 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
• ASTM D 6694 Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing
• ASTM D 6754 Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
• ASTM D 6757 Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing
• ASTM D 6841 Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber
• ASTM D 6859 Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings
• ASTM D 6878 Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
• ASTM E 1 Standard Specification for ASTM Liquid-in-Glass Thermometers
• ASTM E 72 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
• ASTM E 77 Standard Test Method for Inspection and Verification of Thermometers
• ASTM E 84 Standard Test Method for Surface Burning Characteristics of Building Materials
• ASTM E 90 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Element
• ASTM E 94 Standard Guide for Radiographic Examination
• ASTM E 96/E 96M Standard Test Methods for Water Vapor Transmission of Materials
• ASTM E 108 Standard Test Methods for Fire Tests of Roof Coverings
• ASTM E 111 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus
• ASTM E 119 Standard Test Methods for Fire Tests of Building Construction and Materials
• ASTM E 136 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750C
• ASTM E 154 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Grou
• ASTM E 162 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
• ASTM E 164 Standard Practice for Ultrasonic Contact Examination of Weldments
• ASTM E 165 Standard Test Method for Liquid Penetrant Examination
• ASTM E 228 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
• ASTM E 283 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Spe
• ASTM E 313 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
• ASTM E 328 Standard Test Methods for Stress Relaxation for Materials and Structures
• ASTM E 329 Standard Specification for Agencies Engaged in Construction Inspection and/or Testing
• ASTM E 330 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform St
• ASTM E 331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static
• ASTM E 336 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
• ASTM E 405 Standard Test Methods for Wear Testing Rotary Operators for
• ASTM E 408 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
• ASTM E 413 Classification for Rating Sound Insulation
• ASTM E 477 Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silen
• ASTM E 488 Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements
• ASTM E 492 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using t
• ASTM E 514 Standard Test Method for Water Penetration and Leakage Through Masonry
• ASTM E 518 Standard Test Methods for Flexural Bond Strength of Masonry
• ASTM E 519 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
• ASTM E 543 Standard Specification for Agencies Performing Nondestructive Testing
• ASTM E 546 Standard Test Method for Frost Point of Sealed Insulating Glass Units
• ASTM E 547 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static
• ASTM E 557 Standard Guide for The Installation of Operable Partitions
• ASTM E 576 Standard Test Method for Frost Point of Sealed Insulating Glass Units in the Vertical Position
• ASTM E 580/E 580M Standard Practice for Application of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas
• ASTM E 595 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Env
• ASTM E 596 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
• ASTM E 605 Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Membe
• ASTM E 648 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
• ASTM E 661 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Im
• ASTM E 662 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
• ASTM E 681 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
• ASTM E 695 Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
• ASTM E 699 Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Compo
• ASTM E 709 Standard Guide for Magnetic Particle Examination
• ASTM E 736 Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
• ASTM E 759 Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
• ASTM E 760 Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
• ASTM E 761 Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
• ASTM E 773 Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units
• ASTM E 779 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
• ASTM E 783 Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
• ASTM E 795 Standard Practices for Mounting Test Specimens During Sound Absorption Tests
• ASTM E 814 Standard Test Method for Fire Tests of Through-Penetration Fire Stops
• ASTM E 831 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
• ASTM E 859 Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
• ASTM E 894 Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
• ASTM E 906 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
• ASTM E 907 Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems
• ASTM E 935 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
• ASTM E 937 Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
• ASTM E 966 Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements
• ASTM E 970 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
• ASTM E 985 Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
• ASTM E 987 Standard Test Methods for Deglazing Force of Fenestration Products
• ASTM E 1007 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemb
• ASTM E 1105 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, a
• ASTM E 1111 Standard Test Method for Measuring the Interzone Attenuation of Open Office Components
• ASTM E 1130 Standard Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index
• ASTM E 1155 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers
• ASTM E 1155M Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers [Metric]
• ASTM E 1190 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
• ASTM E 1233 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic A
• ASTM E 1264 Standard Classification for Acoustical Ceiling Products
• ASTM E 1300 Standard Practice for Determining Load Resistance of Glass in Buildings
• ASTM E 1332 Standard Classification for Determination of Outdoor-Indoor Transmission Class
• ASTM E 1349 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45:0 or 0:45) Geomet
• ASTM E 1352 Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
• ASTM E 1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption
• ASTM E 1399 Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint S
• ASTM E 1408 Standard Test Method for Laboratory Measurement of the Sound Transmission Loss of Door Panels and Door Systems
• ASTM E 1414 Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
• ASTM E 1423 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
• ASTM E 1425 Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems
• ASTM E 1477 Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectome
• ASTM E 1509 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
• ASTM E 1512 Standard Test Methods for Testing Bond Performance of Bonded Anchors
• ASTM E 1514 Standard Specification for Structural Standing Seam Steel Roof Panel Systems
• ASTM E 1529 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
• ASTM E 1537 Standard Test Method for Fire Testing of Upholstered Furniture
• ASTM E 1573 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound P
• ASTM E 1590 Standard Test Method for Fire Testing of Mattresses
• ASTM E 1591 Standard Guide for Obtaining Data for Deterministic Fire Models
• ASTM E 1592 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressur
• ASTM E 1602 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
• ASTM E 1612 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
• ASTM E 1637 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
• ASTM E 1643 Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concre
• ASTM E 1646 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Diffe
• ASTM E 1677 Standard Specification for an Air Barrier (AB) Material or System for Low-Rise Framed Building Walls
• ASTM E 1680 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
• ASTM E 1725 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
• ASTM E 1745 Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete S
• ASTM E 1783 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
• ASTM E 1886 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impact
• ASTM E 1966 Standard Test Method for Fire-Resistive Joint Systems
• ASTM E 1996 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impac
• ASTM E 2016 Standard Specification for Industrial Woven Wire Cloth
• ASTM E 2098 Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB E
• ASTM E 2174 Standard Practice for On-Site Inspection of Installed Fire Stops
• ASTM E 2231 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burn
• ASTM E 2307 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-stor
• ASTM E 2336 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
• ASTM F 150 Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring
• ASTM F 402 Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and
• ASTM F 405 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings
• ASTM F 409 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
• ASTM F 436 Standard Specification for Hardened Steel Washers
• ASTM F 436M Standard Specification for Hardened Steel Washers [Metric]
• ASTM F 437 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
• ASTM F 438 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
• ASTM F 439 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
• ASTM F 441/F 441M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
• ASTM F 442/F 442M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDRPR)
• ASTM F 444 Standard Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas
• ASTM F 445 Standard Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas
• ASTM F 446 Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area
• ASTM F 449 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Tabl
• ASTM F 462 Standard Consumer Safety Specification for Slip-Resistant Bathing Facilities
• ASTM F 476 Standard Test Methods for Security of Swinging Door Assemblies
• ASTM F 477 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
• ASTM F 480 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH
• ASTM F 481 Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
• ASTM F 493 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
• ASTM F 510 Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
• ASTM F 512 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
• ASTM F 547 Standard Terminology of Nails for Use with Wood and Wood-Base Materials
• ASTM F 567 Standard Practice for Installation of Chain-Link Fence
• ASTM F 568M Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners
• ASTM F 588 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
• ASTM F 593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
• ASTM F 594 Standard Specification for Stainless Steel Nuts
• ASTM F 626 Standard Specification for Fence Fittings a
• ASTM F 628 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With
• ASTM F 645 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
• ASTM F 654 Standard Specification for Residential Chain Link Fence Gates
• ASTM F 656 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fi
• ASTM F 667 Standard Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings
• ASTM F 668 Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
• ASTM F 679 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
• ASTM F 690 Standard Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems
• ASTM F 693 Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
• ASTM F 708 Standard Practice for Design and Installation of Rigid Pipe Hangers
• ASTM F 710 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
• ASTM F 714 Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
• ASTM F 738M Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
• ASTM F 771 Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems
• ASTM F 793 Standard Classification of Wall Covering by Use Characteristics
• ASTM F 794 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Ins
• ASTM F 810 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
• ASTM F 835 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
• ASTM F 835M Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]
• ASTM F 836M Standard Specification for Style 1 Stainless Steel Metric Nuts
• ASTM F 837 Standard Specification for Stainless Steel Socket Head Cap Screws
• ASTM F 837M Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
• ASTM F 842 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
• ASTM F 844 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
• ASTM F 851 Standard Test Method for Self-Rising Seat Mechanisms
• ASTM F 876 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
• ASTM F 877 Standard Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
• ASTM F 879 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
• ASTM F 879M Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]
• ASTM F 883 Standard Performance Specification for Padlocks
• ASTM F 891 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
• ASTM F 900 Standard Specification for Industrial and Commercial Swing Gates
• ASTM F 904 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Material
• ASTM F 925 Standard Test Method for Resistance to Chemicals of Resilient Flooring
• ASTM F 934 Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
• ASTM F 959 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
• ASTM F 959M Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Met
• ASTM F 969 Standard Practice for Construction of Chain-Link Tennis Court Fence
• ASTM F 970 Standard Test Method for Static Load Limit
• ASTM F 1007 Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
• ASTM F 1043 Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework
• ASTM F 1066 Standard Specification for Vinyl Composition Floor Tile
• ASTM F 1083 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
• ASTM F 1120 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
• ASTM F 1123 Standard Specification for Non-Metallic Expansion Joints
• ASTM F 1135 Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners
• ASTM F 1137 Standard Specification for Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners
• ASTM F 1141 Standard Specification for Wallcovering
• ASTM F 1182 Standard Specification for Anodes, Sacrificial Zinc Alloy
• ASTM F 1183 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
• ASTM F 1184 Standard Specification for Industrial and Commercial Horizontal Slide Gates
• ASTM F 1233 Standard Test Method for Security Glazing Materials And Systems
• ASTM F 1249 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared
• ASTM F 1267 Standard Specification for Metal, Expanded, Steel
• ASTM F 1281 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
• ASTM F 1282 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
• ASTM F 1290 Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings a
• ASTM F 1292 Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment
• ASTM F 1303 Standard Specification for Sheet Vinyl Floor Covering with Backing
• ASTM F 1344 Standard Specification for Rubber Floor Tile
• ASTM F 1345 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
• ASTM F 1346 Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Sp
• ASTM F 1379 Standard Terminology Relating to Barbed Tape
• ASTM F 1412 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
• ASTM F 1417 Standard Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air
• ASTM F 1450 Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities
• ASTM F 1476 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
• ASTM F 1487 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
• ASTM F 1488 Standard Specification for Coextruded Composite Pipe
• ASTM F 1499 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
• ASTM F 1516 Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)
• ASTM F 1554 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
• ASTM F 1577 Standard Test Methods for Detention Locks for Swinging Doors
• ASTM F 1592 Standard Test Methods for Detention Hollow Metal Vision Systems
• ASTM F 1642 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
• ASTM F 1643 Standard Test Methods for Detention Sliding Door Locking Device Assembly
• ASTM F 1664 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire
• ASTM F 1665 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire
• ASTM F 1667 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
• ASTM F 1668 Standard Guide for Construction Procedures for Buried Plastic Pipe
• ASTM F 1673 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
• ASTM F 1700 Standard Specification for Solid Vinyl Floor Tile
• ASTM F 1758 Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors
• ASTM F 1759 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
• ASTM F 1807 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (P
• ASTM F 1859 Standard Specification for Rubber Sheet Floor Covering Without Backing
• ASTM F 1861 Standard Specification for Resilient Wall Base
• ASTM F 1866 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
• ASTM F 1869 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chlorid
• ASTM F 1911 Standard Practice for Installation of Barbed Tape
• ASTM F 1913 Standard Specification for Vinyl Sheet Floor Covering Without Backing
• ASTM F 1915 Standard Test Methods for Glazing for Detention Facilities
• ASTM F 1916 Standard Specifications for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabric and Round Posts
• ASTM F 1951 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
• ASTM F 1960 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene
• ASTM F 1974 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene
• ASTM F 1986 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Dri
• ASTM F 2006 Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingre
• ASTM F 2014 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
• ASTM F 2075 Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground
• ASTM F 2080 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX
• ASTM F 2090 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms a
• ASTM F 2098 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal
• ASTM F 2159 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene
• ASTM F 2170 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
• ASTM F 2389 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
• ASTM G 21 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
• ASTM G 87 Standard Practice for Conducting Moist SO2 Tests
• ASTM G 90 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Su
• ASTM G 152 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
• ASTM G 153 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
• ASTM G 154 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
• ASTM G 155 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

Subscription Information

MADCAD.com ASTM Standards subscriptions are annual and access is unlimited concurrency based (number of people that can access the subscription at any given time) from single office location. For pricing on multiple office location ASTM Standards Subscriptions, please contact us at info@madcad.com or +1 800.798.9296.

Some features of MADCAD.com ASTM Standards Subscriptions are:

- Online access: With MADCAD.com’ s web based subscription service no downloads or installations are required. Access ASTM Standards from any browser on your computer, tablet or smart phone.

- Immediate Access: As soon as the transaction is completed, your ASTM Standards Subscription will be ready for access.

For any further information on MADCAD.com ASTM Standards Subscriptions, please contact us at info@madcad.com or +1 800.798.9296.

About ASTM

ASTM International, formerly known as the American Society for Testing and Materials (ASTM), is a globally recognized leader in the development and delivery of international voluntary consensus standards. Today, some 12,000 ASTM standards are used around the world to improve product quality, enhance safety, facilitate market access and trade, and build consumer confidence. ASTM’s leadership in international standards development is driven by the contributions of its members: more than 30,000 of the world’s top technical experts and business professionals representing 150 countries. Working in an open and transparent process and using ASTM’s advanced electronic infrastructure, ASTM members deliver the test methods, specifications, guides, and practices that support industries and governments worldwide.