Content Description

• (308-213)R-13 Report on Internally Cured Concrete Using Prewetted Absorptive Lightweight Aggregate / 2013
• 117-10 Specification for Tolerances for Concrete Construction and Materials (ACI 117-10) and Commentary-Reapproved 2015 / 2010
• 117.1R-14 Guide for Tolerance Compatibility in Concrete Construction / 2014
• 117M-10 Metric Specification for Tolerances for Concrete Construction and Materials and Commentary (Reapp 2015) / 2010
• 121.1R-16: Guide to Quality Management Auditing in the Concrete Industry / 2016
• 121R-08 Guide for Concrete Construction Quality Systems in Conformance with ISO 9001 / 2008
• 122R-14 Guide to Thermal Properties of Concrete and Masonry Systems / 2014
• 131.1R-14 Information Delivery Manual for Cast-in-Place Concrete / 2015
• 131.2R-17 Guide to Use of Industry Foundation Classes in Exchange of Reinforcement Models / 2017
• 132R-14 Guide for Responsibility in Concrete Construction / 2014
• 201.1R-08 Guide for Conducting a Visual Inspection of Concrete in Service / 2008
• 201.2R-08: Guide to Durable Concrete / 2008
• 201.2R-16 Guide to Durable Concrete / 2016
• 207.1R-05: Guide to Mass Concrete (Reapproved 2012) / 2005
• 207.2R-07 Report on Thermal and Volume Change Effects on Cracking of Mass Concrete / 2007
• 207.3R-94: Practices for Evaluation of Concrete in Existing Massive Structures for Service Conditions (Reapproved 2008) / 1994
• 207.4R-05: Cooling and Insulating Systems for Mass Concrete (Reapproved 2012) / 2005
• 207.5R-11 Report on Roller-Compacted Mass Concrete / 2011
• 207.6R-17 Report on the Erosion of Concrete in Hydraulic Structures / 2017
• 209.2R-08 Guide for Modeling and Calculating Shrinkage and Creep in Hardened Concrete / 2008
• 209R-92: Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures (Reapproved 2008) / 1992
• 210R-93: Erosion of Concrete in Hydraulic Structures (Reapproved 2008) / 1993
• 211.1-91: Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete (Reapproved 2009) / 1991
• 211.2-98: Standard Practice for Selecting Proportions for Structural Lightweight Concrete (Reapproved 2004) / 1998
• 211.3R-02: Guide for Selecting Proportions for No-Slump Concrete (Reapproved 2009) / 2002
• 211.4R-08: Guide for Selecting Proportions for High-Strength Concrete Using Portland Cmt & Other Cementitious Material / 2008
• 211.5R-14 Guide for Submittal of Concrete Proportions / 2014
• 211.6T-14 Aggregate Suspension Mixture Proportioning Method / 2014
• 211.7R-15: Guide for Proportioning Concrete Mixtures with Ground Limestone and Other Mineral Fillers / 2015
• 211.8R-15 Guide to Troubleshooting Concrete Mixture Issues as Influenced by Constitutive Materials, Jobsite Conditions / 2015
• 211.9R-18: Guide to Selecting Proportions for Pumpable Concrete 2018 / 2018
• 212.3R-16 Report on Chemical Admixtures for Concrete / 2016
• 213R-14 Guide for Structural Lightweight-Aggregate Concrete / 2014
• 214.4R-10 Guide for Obtaining Cores and Interpreting Compressive Strength Results / 2010
• 214R-11 Guide to Evaluation of Strength Test Results of Concrete / 2011
• 214RS-11 Guide to Evaluation of Strength Test Results of Concrete - Spanish Language / 2011
• 216.1-14 Code Requirements for Determining Fire Resistance of Concrete and Masonry Construction Assemblies / 2014
• 216.1M-07 Code Requirements for Determining Fire Resistance of Concrete and Masonry Construction Assemblies (Metric) / 2008
• 221.1R-98: Report on Alkali-Aggregate Reactivity (Reapproved 2008) / 1998
• 221R-96: Guide for Use of Normal Weight and Heavyweight Aggregates in Concrete (Reapproved 2001) / 1996
• 222.2R-14 Report on Corrosion of Prestressing Steels / 2014
• 222.3R-11 Guide to Design and Construction Practices to Mitigate Corrosion of Reinforcement in Concrete Structures / 2011
• 222R-01: Protection of Metals in Concrete Against Corrosion (Reapproved 2010) / 2001
• 223R-10 Guide for the Use of Shrinkage-Compensating Concrete / 2010
• 224.1R-07 Causes, Evaluation, and Repair of Cracks in Concrete Structures / 2007
• 224.2R-92: Cracking of Concrete Members in Direct Tension (Reapproved 2004) / 1992
• 224.3R-95: Joints in Concrete Construction (Reapproved 2013) / 1995
• 224.4R-13 Guide to Design Detailing to Mitigate Cracking / 2014
• 224R-01: Control of Cracking in Concrete Structures (Reapproved 2008) / 2001
• 225R-16 Guide to the Selection and Use of Hydraulic Cements / 2016
• 228.1R-03: In-Place Methods to Estimate Concrete Strength / 2003
• 228.2R-13 Report on Nondestructive Test Methods for Evaluation of Concrete in Structures / 2013
• 229R-13 Report on Controlled Low-Strength Materials / 2013
• 230.1R-09: Report on Soil Cement / 2009
• 231R-10 Report on Early-Age Cracking: Causes, Measurement and Mitigation / 2010
• 232.1R-12 Report on the Use of Raw or Processed Natural Pozzolans in Concrete / 2012
• 232.2R-03: Use of Fly Ash in Concrete / 2003
• ACI 232.2R-18: Report on the Use of Fly Ash in Concrete / 2018
• 232.3R-14 Report on High-Volume Fly Ash Concrete for Structural Applications / 2014
• 233R-03: Slag Cement in Concrete and Mortar (Reapproved 2011) / 2003
• 233R-17: Guide to the Use of Slag Cement in Concrete and Mortar / 2017
• 234R-06: Guide for the Use of Silica Fume in Concrete (Reapproved 2012) / 2006
• 237R-07 Self-Consolidating Concrete / 2007
• 238.1R-08 Report on Measurements of Workability and Rheology of Fresh Concrete / 2008
• 238.2T-14 Concrete Thixotropy / 2014
• 239R-18: Ultra-High-Performance Concrete: An Emerging Technology Report 2018 / 2018
• 241R-17: Report on Application of Nanotechnology and Nanomaterials in Concrete / 2017
• 301-16 Specifications for Structural Concrete / 2016
• 301M-16 Metric Specifications for Structural Concrete / 2016
• 302.1R-15 Guide to Concrete Floor and Slab Construction / 2015
• 302.2R-06: Guide for Concrete Slabs that Receive Moisture-Sensitive Flooring Materials / 2006
• 303R-12 Guide to Cast-in-Place Architectural Concrete Practice / 2012
• 304.2R-17 Guide to Placing Concrete by Pumping Methods / 2017
• 304.2R-96: Placing Concrete by Pumping Methods (Reapproved 2008) / 1996
• 304.3R-96: Heavyweight Concrete: Measuring, Mixing, Transporting, and Placing (Reapproved 2004) / 1997
• 304.4R-95: Placing Concrete with Belt Conveyors (Reapproved 2008) / 1995
• 304.6R-09 Guide for Use of Volumetric-Measuring and Continuous-Mixing Concrete Equipment / 2009
• 304R-00: Guide for Measuring, Mixing, Transporting, and Placing Concrete (Reapproved 2009) / 2000
• 305.1-14 Specification for Hot Weather Concreting / 2014
• 305.1M-14 Specification for Hot Weather Concreting / 2015
• 305RS-10 Guide to Hot Weather Concreting/306RS-10 Guide to Cold Weather Concreting - Spanish Language / 2011
• 306.1-90: Standard Specification for Cold Weather Concreting (Reapproved 2002) / 1990
• 306R-16 Guide to Cold Weather Concreting / 2016
• 307-08: Code Requirements for Reinforced Concrete Chimneys (ACI 307-08) and Commentary / 2008
• 308.1-11: Specification for Curing Concrete / 2011
• 308.1M-11 Metric Specification for Curing Concrete / 2011
• 308R-16 Guide to External Curing of Concrete / 2016
• 309.1R-08: Report on Behavior of Fresh Concrete During Vibration / 2008
• 309.2R-15 Guide to Identification and Control of Visible Surface Effects of Consolidation on Formed Concrete Surfaces / 2015
• 309.5R-00: Compaction of Roller-Compacted Concrete (Reapproved 2006) / 2000
• 309R-05: Guide for Consolidation of Concrete / 2005
• 310R-13 Guide to Decorative Concrete / 2013
• 311.4R-05: Guide for Concrete Inspection / 2005
• 311.5-04: Guide for Concrete Plant Inspection and Testing of Ready-Mixed Concrete / 2004
• 311.6-09 Specification for Ready Mixed Concrete Testing Services / 2009
• 311.6-18: Specification for Testing Ready Mixed Concrete 2018 / 2018
• 311.6M-09 Specification for Ready Mixed Concrete Testing Services (METRIC) / 2009
• 311.7-14 Inspection Services Specification for Cast- In-Place Concrete Construction / 2014
• ACI 311.7-18: Specification for Inspection of Concrete Construction / 2018
• 313-16: Design Specification for Concrete Silos and Stacking Tubes for Storing Granular Materials and Commentary / 2016
• 314R-16 Guide to Simplified Design for Reinforced Concrete Buildings / 2016
• ACI 315R-18: Guide to Presenting Reinforcing Steel Design Details / 2018
• 318-14: Building Code Requirements for Structural Concrete and Commentary, Sixth Printing - ERRATA as of August 21, 2017 / 2014
• 318.2-14 Building Code Requirements for Concrete Thin Shells and Commentary / 2014
• 318.2M-14 Building Code Requirements for Concrete Thin Shells and Commentary / 2014
• 318M-14: Metric Building Code Requirements for Structural Concrete and Commentary / 2015
• 325.9R-15 Guide for Construction of Concrete Pavements / 2015
• 325.11R-01: Accelerated Techniques for Concrete Paving / 2001
• 325.12R-02: Guide for Design of Jointed Concrete Pavements for Streets and Local Roads (Reapproved 2013) / 2002
• 325.13R-06: Concrete Overlays for Pavement Rehabilitation / 2006
• 325.14R-17: Guide for Design and Proportioning of Concrete Mixtures for Pavements / 2017
• 327R-14 Guide to Roller-Compacted Concrete Pavements / 2015
• 329R-14 Report on Performance-Based Requirements for Concrete / 2014
• 330.1-14: Specification for Unreinforced Concrete Parking Lots and Site Paving / 2014
• 330.1M-14: Specification for Unreinforced Concrete Parking Lots and Site Paving / 2014
• 330.2R-17: Guide for the Design and Construction of Concrete Site Paving for Industrial and Trucking Facilities / 2017
• 330R-08 Guide for the Design and Construction of Concrete Parking Lots / 2008
• 332-14 Residential Code Requirements for Structural Concrete and Commentary / 2014
• 332.1R-06 Guide to Residential Concrete Construction / 2006
• ACI 332.1R-18: Guide to Residential Concrete Construction / 2018
• 332M-14 Residential Code Requirements for Structural Concrete and Commentary (Metric) / 2014
• 334.1R-92: Concrete Shell Structures Practice and Commentary (Reapproved 2002) / 1992
• 334.3R-05: Construction of Concrete Shells Using Inflated Forms / 2005
• 336.1-01: Specification for the Construction of Drilled Piers / 2001
• 336.2R-88: Suggested Analysis and Design Procedures for Combined Footings and Mats (Reapproved 2002) / 1988
• 336.3R-14 Report on Design and Construction of Drilled Piers / 2014
• 341.2R-14 Analysis and Design of Seismic-Resistant Concrete Bridge Systems / 2014
• 341.3R-07 Seismic Evaluation and Retrofit Techniques for Concrete Bridges / 2007
• 341.4R-16: Report on the Seismic Design of Bridge Columns Based on Drift / 2016
• 342R-16 Report on Flexural Live Load Distribution Methods for Evaluating Existing Bridges / 2016
• 343.1R-12 Guide for the Analysis and Design of Reinforced and Prestressed Concrete Guideway Structures / 2012
• 343R-95: Analysis & Design of Reinforced Concrete Bridge Structures (Repproved 2004) / 1995
• 345.1R-16 Guide to Maintenance of Concrete Bridge Members / 2016
• 345.2R-13 Guide for Widening Highway Bridges / 2013
• 345R-11 Guide for Concrete Highway Bridge Deck Construction / 2011
• 346-09: Specification for Cast-in-Place Concrete Pipe / 2009
• 346M-09: Specification for Cast-in-Place Concrete Pipe - METRIC / 2009
• 347.2R-05: Guide for Shoring/Reshoring of Concrete Multistory Buildings / 2005
• 347.2R-17: Guide for Shoring/Reshoring of Concrete Multistory Buildings / 2017
• 347.3R-13 Guide to Formed Concrete Surfaces / 2014
• 347R-14 Guide to Formwork for Concrete / 2014
• 349-13 Code Requirements for Nuclear Safety-Related Concrete Structures and Commentary / 2014
• 349.1R-07 Reinforced Concrete Design for Thermal Effects on Nuclear Power Plant Structures / 2007
• 349.2R-07 Guide to the Concrete Capacity Design (CCD) Method - Embedment Design Examples / 2007
• 349.2R-07 Guide to the Concrete Capacity Design (CCD) Method - Embedment Design Examples (Reapproved 2014) / 2007
• 349.3R-02: Evaluation of Existing Nuclear Safety Related Concrete Structures(Reapp 2010) / 2002
• 349M-13 Metric Code Requirements for Nuclear Safety-Related Concrete Structures and Commentary, First Printing - Errata as of 8/8/2017 / 2014
• 350-06 Code Requirements for Environmental Engineering Concrete Structures / 2006
• 350.1-10 Specification for Tightness Testing of Environmental Engineering Concrete Containment Structures & Commentary / 2011
• 350.1M-10 Metric Specification for Tightness Testing of Environmental Engineering Concrete Containment Structures & Comm / 2011
• 350.2R-04: Concrete Structures for Containment of Hazardous Materials / 2004
• 350.3-06 Seismic Design of Liquid-Containing Concrete Structures and Commentary / 2006
• 350.4R-04: Design Considerations for Environmental Engineering Concrete Structures / 2004
• 350.5-12 Specifications for Environmental Concrete Structures / 2013
• 350.5M-12 Metric Specifications for Environmental Concrete Structures / 2013
• 350M-06 Metric Code Requirements for Environmental Engineering Concrete Structures & Commentary / 2008
• 351.1R-12 Report on Grouting Between Foundations and Bases for Support of Equipment & Machinery / 2012
• 351.2R-10 Report on Foundations for Static Equipment / 2010
• 351.3R-04: Foundations for Dynamic Equipment (Reapproved 2011) / 2004
• ACI 351.3R-18: Report on Foundations for Dynamic Equipment / 2018
• 351.4-14 Specification for Installation of Cementitious Grouting between Foundations and Equipment Bases / 2015
• 351.4M-14 Specification for Installation of Cementitious Grouting between Foundations and Equipment Bases (Metric) / 2015
• 351.5-15 Specification for Installation of Epoxy Grout between Foundations and Equipment Bases / 2015
• 351.5M-15 Specification for Installation of Epoxy Grout between Foundations and Equipment Bases (Metric) / 2015
• 352.1R-11: Guide for Design of Slab-Column Connections in Monolithic Concrete Structures / 2012
• 352R-02: Recommendations for Design of Beam-Column Connections in Monolithic Reinforced Concrete Structures(Reapp 2010) / 2002
• 355.2-07 Qualification of Post-Installed Mechanical Anchors in Concrete & Commentary / 2007
• 355.3R-11 Guide for Design of Anchorage to Concrete: Examples Using ACI 318 Appendix D / 2011
• 355.4-11 Qualification of Post-Installed Adhesive Anchors in Concrete and Commentary / 2011
• 355.4M-11 Metric Qualification of Post-Installed Adhesive Anchors in Concrete and Commentary / 2011
• 357.2R-10 Report on Floating and Float-In Concrete Structures / 2010
• 357.3R-14 Guide for Design and Construction of Waterfront and Coastal Concrete Marine Structures / 2014
• 357R-84: Guide for the Design and Construction of Fixed Offshore Concrete Structures (Reapproved 1997) / 1984
• 360R-10 Guide to Design of Slabs-on-Ground / 2010
• 362.1R-12 Guide for the Design and Construction of Durable Concrete Parking Structures / 2012
• 362.2R-00: Guide for Structural Maintenance of Parking Structures (Reapproved 2013) / 2000
• 363.2R-11 Guide to Quality Control and Assurance of High-Strength Concrete / 2011
• 363R-10 Report on High-Strength Concrete / 2010
• 364.1R-07 Guide for Evaluation of Concrete Structures before Rehabilitation / 2007
• 364.2T-08: TechNote: Increasing Shear Capacity Within Existing Reinforced Concrete Structures / 2008
• 364.3R-09: Guide for Cementitious Repair Material Data Sheet / 2009
• 364.3T-15 Treatment of Exposed Epoxy-Coated Reinforcement in Repair / 2015
• 364.4T-10 TechNote:Determining the Load Capacity of a Structure When As-Built Drawings are Unavailable / 2010
• 364.5T-10 Tech-Note: Importance of Modulus of Elasticity in Surface Repair Materials / 2010
• 364.6T-02 - Tech-Note: Concrete Removal in Repairs Involving Corroded Reinforcing Steel (Reapproved 2011) / 2002
• 364.7T-02 - Tech-Note: Evaluation and Minimization of Bruising (Microcracking) in Concrete Repair (Reapproved 2011) / 2002
• 364.8T-02 - Tech-Note: Use of Hydrodemolition for Concrete Removal in Unbonded Post-Tensioned Systems (Reapproved 2011) / 2002
• 364.9T-03 - Tech-Note: Cracks in a Repair (Reapproved 2011) / 2003
• 364.10T-14 Rehabilitation of Structure with Reinforcement Section Loss / 2014
• 364.11T-15 Managing Alkali-Aggregate Reaction Expansion in Mass Concrete / 2015
• 364.12T-15 TechNote: Repair of Leaking Cracks in the Walls of Liquid Containment Structures / 2015
• 364.13T-15 TechNote: Repair for Reinforcement with Shallow Cover / 2015
• 364.14T-17: TechNote: Section Loss Determination of Damaged or Corroded Reinforcing Steel Bars / 2017
• ACI 364.15T-18: TechNote: Significance of the Shrinkage-Compensating and Nonshrink Labels on Packaged Repair Materials / 2018
• ACI 364.16T-18: TechNote: Physical Properties and Characteristics Affecting the Sensitivity to Cracking of Cementitious Repair Materials / 2018
• 364.17T-18: How to measure pH of a concrete surface prior to installation of a Floor Covering 2018 / 2018
• 365.1R-00: Service-Life Prediction / 2000
• 369.1M-17: Standard Requirements for Seismic Evaluation and Retrofit of Existing Concrete Buildings (ACI 369.1M-17) and Commentary (Metric) / 2018
• 369R-11 Guide for Seismic Rehabilitation of Existing Concrete Frame Buildings and Commentary / 2011
• 370R-14 Report for the Design of Concrete Structures for Blast Effects / 2014
• 371R-08: Guide for the Analysis, Design, and Construction of Elevated Concrete and Composite Steel - Concrete Water Storage Tanks / 2008
• 372R-13 Guide to Design and Construction of Circular Wire-and-Strand-Wrapped Prestressed Concrete Structures / 2013
• 374.1-05: Acceptance Criteria for Moment Frames Based on Structural Testing and Commentary (Reapproved 2014) / 2005
• 374.2R-13 Guide for Testing Reinforced Concrete Structural Elements Under Slowly Applied Simulated Seismic Loads / 2013
• 374.3R-16 Guide to Nonlinear Modeling Parameters for Earthquake-Resistant Structures / 2016
• 376-11 Code Reqs for Design & Construction of Concrete Structures for Containment of Refrigerated Liquefied Gases & Comm / 2013
• 376M-11 Metric Code Reqs for Design & Constr of Conc Structures for Containment of Refrigerated Liquefied Gases / 2013
• 408.2R-12 Report on Bond of Steel Reinforcing Bars Under Cyclic Loads / 2012
• 408.3R-09 Guide for Lap Splice and Development Length of High Relative Rib Area Reinf Bars in Tension & Commenta / 2009
• 408R-03: Bond and Development of Straight Reinforcing Bars in Tension (Reapproved 2012) / 2003
• 421.1R-08 - Guide to Shear Reinforcement for Slabs / 2008
• 421.2R-10 Guide to Seismic Design of Punching Shear Reinforcement in Flat Plates / 2010
• 421.3R-15 Guide to Design of Reinforced Two-Way Slab Systems / 2015
• 423.3R-05: Recommendations for Concrete Members Prestressed with Unbonded Tendons / 2005
• 423.3R-17: Recommendations for Concrete Members Prestressed with Single-Strand Unbonded Tendons / 2017
• 423.4R-14 Report on Corrosion and Repair of Unbonded Single-Strand Tendons / 2014
• 423.7-14 Specification for Unbonded Single-Strand Tendon Materials / 2014
• 423.8R-10 Report on Corrosion and Repair of Grouted Multistrand and Bar Tendon Systems / 2010
• 423.9M-10 Metric Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout / 2010
• 423.10R-16 Guide to Estimating Prestress Losses / 2016
• 435.8R-85: Observed Deflections of Reinforced Concrete Slab Systems, and Causes of Large Deflections (Reapproved 1997) / 1985
• 435R-95: Control of Deflection in Concrete Structures (Reapproved 2000) / 1995
• 437.1R-07 Load Tests of Concrete Structures: Methods, Magnitude, Protocols & Acceptance Criteria / 2007
• 437.2-13 Code Requirements for Load Testing of Existing Concrete Structures and Commentary / 2014
• 437.2M-13 Metric Code Requirements for Load Testing of Existing Concrete Structures and Commentary / 2014
• 437R-03: Strength Evaluation of Existing Concrete Buildings / 2003
• 439.3R-07 Types of Mechanical Splices for Reinforcing Bars / 2007
• 439.4R-09 Report on Steel Reinforcement - Material Properties and U.S. Availability / 2009
• 439.4R-09 Report on Steel Reinforcement - Material Properties and U.S. Availability (Reapproved 2017) / 2009
• 439.5R-18: Guide for the Specification, Manufacture, and Construction Use of Welded Wire Reinforcement 2018 / 2018
• 440.1R-15 Guide for the Design and Construction of Structural Concrete Reinforced with Fiber-Reinforced Polymer Bars / 2015
• 440.2R-08 Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures / 2008
• 440.2R-17: Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, First Printing: May 2017 - Errata as of August 22, 2017 / 2017
• 440.3R-12 Guide Test Methods for Fiber-Reinforced Polymers (FRPs) for Reinforcing or Strengthening Concrete Structures / 2012
• 440.4R-04: Prestressing Concrete Structures with FRP Tendons (Reapproved 2011) / 2004
• 440.5-08 Specification for Construction with Fiber-Reinforced Polymer Reinforcing Bars / 2008
• 440.5M-08 Metric Specification for Construction with Fiber-Reinforced Polymer (FRP) Reinforcing Bars / 2008
• 440.6-08 Specification for Carbon and Glass Fiber-Reinforced Polymer Bar Materials for Concrete Reinforcement / 2008
• 440.6M-08 Metric Specification for Carbon & Glass Fiber-Reinforced Polymer Bar Materials for Conc Reinforcement / 2008
• 440.7R-10 Guide for Design & Constr of Externally Bonded FRP Systems for Strengthening Unreinforced Masonry Structures / 2010
• 440.8-13 Specification for Carbon and Glass Fiber-Reinforced Polymer Materials Made by Wet Layup for External Strengthen / 2014
• 440.8M-13 Specification for Carbon and Glass Fiber-Reinforced Polymer Materials Made by Wet Layup for External Strengthe / 2014
• 440.9R-15 Guide to Accelerated Conditioning Protocols for Durability Assessment of Internal and External Fiber-Reinforce / 2015
• 440R-07 Report on Fiber-Reinforced Polymer (FRP) Reinforcement for Concrete Structures / 2007
• 441.1R-18: Report on Equivalent Rectangular Concrete Stress Block and Transverse Reinforcement for High Strength Concrete Columns 2018 / 2018
• 441R-96: High Strength Concrete Columns / 1996
• 445.1R-12 Report on Torsion in Structural Concrete / 2013
• 445R-99: Recent Approaches to Shear Design of Structural Concrete (Reapproved 2009) / 1999
• 446.1R-91: Fracture Mechanics of Concrete: Concepts, Models and Determination of Material Properties (Reapproved 1999) / 1991
• 446.3R-97: Finite Element Analysis of Fracture in Concrete Structures / 1997
• 446.4R-04: Report on Dynamic Fracture of Concrete / 2004
• 447.1R-18: Report on the Modeling Techniques Used in Finite Element Simulations of Concrete Structures Strengthened Using Fiber-Reinforced Polymer (FRP) Materials 2018 / 2018
• ACI 447R-18: Design Guide for Twisting Moments in Slabs / 2018
• 503.3-10 Specification for Producing a Skid-Resistant Surface on Concrete by the Use of Epoxy and Aggregate / 2010
• 503.3M-10 Metric - Specification for Producing a Skid-Resistant Surface on Concrete by the Use of Epoxy and Aggregate / 2010
• 503.5R-92: Guide for the Selection of Polymer Adhesives in Concrete (Reapproved 2003) / 1992
• 503.7-07 Specification for Crack Repair by Epoxy Injection / 2007
• 506.1R-08: Guide to Fiber-Reinforced Shotcrete / 2008
• 506.2-13 Specification for Shotcrete / 2014
• 506.2M-13 Specification for Shotcrete (Metric), First Printing May 2014 - Errata as of 8/8/2017 / 2014
• 506.4R-94: Guide For The Evaluation of Shotcrete (Reapproved 2004) / 1994
• 506.5R-09: Guide for Specifying Underground Shotcrete / 2009
• 506.6T-17: Visual Shotcrete Core Quality Evaluation Technote / 2017
• 506R-16 Guide to Shotcrete / 2016
• 515.2R-13 Guide to Selecting Protective Treatments for Concrete / 2013
• 522.1-13 Specification for Pervious Concrete Pavement / 2013
• 522.1M-13 Metric Specification for Pervious Concrete Pavement / 2013
• 522R-10 Report on Pervious Concrete (Reapproved 2011), First Printing: March 2010 - Errata as of 8/8/2017 / 2010
• 523.1R-06 Guide for Cast-in-Place Low Density Cellular Concrete / 2006
• 523.2R-96: Guide for Precast Cellular Concrete Floor, Roof, and Wall Units / 1997
• 523.3R-14 Guide for Cellular Concretes Above 50 lb/ft 3 (800 kg/m 3) / 2014
• 523.4R-09 Guide for Design and Construction with Autoclaved Aerated Concrete Panels / 2009
• 524R-16 Guide to Portland Cement-Based Plaster / 2016
• 530/530.1-11: Building Code Requirements and Specification for Masonry Structures and Related Commentaries / 2011
• 530/530.1-13: Building Code Requirements and Specification for Masonry Structures and Companion Commentaries / 2013
• 533R-11 Guide for Precast Concrete Wall Panels / 2012
• 543R-12 Guide To Design, Manufacture, and Installation of Concrete Piles / 2012
• 544.1R-96: Report on Fiber Reinforced Concrete (Reapproved 2009) / 1996
• 544.2R-17: Report on the Measurement of Fresh State Properties and Fiber Dispersion of Fiber-Reinforced Concrete / 2017
• 544.2R-89: Measurement of Properties of Fiber Reinforced Concrete (Reapproved 2009) / 1989
• 544.3R-08: Guide for Specifying, Proportioning, and Production of Fiber-Reinforced Concrete / 2008
• 544.4R-18: Guide to Design with Fiber-Reinforced Concrete 2018 / 2018
• 544.4R-88: Design Considerations for Steel Fiber Reinforced Concrete (Reapproved 2009) / 1988
• 544.5R-10: Report on the Physical Properties and Durability of Fiber-Reinforced Concrete / 2010
• 544.6R-15 Report on Design and Construction of Steel Fiber-Reinforced Concrete Elevated Slabs / 2015
• 544.7R-16 Report on Design and Construction of Fiber-Reinforced Precast Concrete Tunnel Segments / 2016
• 544.8R-16: Report on Indirect Method to Obtain Stress-Strain Response of Fiber-Reinforced Concrete (FRC) / 2016
• 544.9R-17: Report on Measuring Mechanical Properties of Hardened Fiber-Reinforced Concrete / 2017
• 546.2R-10 Guide to Underwater Repair of Concrete / 2010
• 546.3R-14 Guide to Materials Selection for Concrete Repair / 2014
• 546R-14 Guide to Concrete Repair / 2014
• 548.1R-09: Guide for the Use of Polymers in Concrete / 2009
• 548.3R-09: Report on Polymer-Modified Concrete / 2009
• 548.4-11 Specification for Latex-Modified Concrete Overlays / 2012
• 548.4M-11 Metric Specification for Latex-Modified Concrete Overlays / 2012
• 548.5R-16 Guide for Polymer Concrete Overlays / 2016
• 548.8-07 Specification for Type EM (Epoxy Multi-Layer) Polymer Overlay for Bridge and Parking Garage Decks / 2007
• 548.8M-07 Metric Specification for Type EM (Epoxy Multi-Layer) Polymer Overlay for Bridge and Parking Garage Decks / 2007
• 548.9-08: Specification for Type ES (Epoxy Slurry) Polymer Overlays for Bridge and Parking Garage Decks / 2008
• 548.9M-08: Specification for Type ES (Epoxy Slurry) Polymer Overlay for Bridge and Parking Garage Decks (Metric) / 2008
• 548.10-10 Specification for Type MMS (Methyl Methacrylate Slurry) Polymer Overlays for Bridge and Parking Garage Decks / 2010
• 548.10M-10 Metric Specification for Type MMS (Methyl Methacrylate Slurry) Polymer Overlays for Bridge and Parking Garage / 2010
• 548.11R-12 Guide for the Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed and Hardened Concretes / 2012
• 548.12-12 Specification for Bonding Hardened Concrete and Steel to Hardened Concrete with an Epoxy Adhesive / 2013
• 548.13-14 - Specification for Bonding Fresh Concrete to Hardened Concrete with a Multi-Component Epoxy Adhesive / 2014
• 548.13M-14 Metric Specification for Bonding Fresh Concrete to Hardened Concrete with a Multi-Component Epoxy Adhesive / 2014
• 548.14-14 Specification for Repairing Concrete with Epoxy Mortar / 2015
• 548.14M-14 Specification for Repairing Concrete with Epoxy Mortar / 2015
• 549.1R-18: Design Guide for Ferrocement / 2018
• 549.1R-93: Guide for the Design, Construction & Repair of Ferrocement (Reapproved 2009) / 1993
• 549.2R-04: Report on Thin Reinforced Cementitious Products (Reapproved 2013) / 2004
• 549.3R-09 Report on Glass Fiber-Reinforced Concrete Premix / 2009
• 549.3R-09 Report on Glass Fiber-Reinforced Concrete Premix (Reapproved 2017) / 2009
• 549.4R-13 Guide to Design and Construction of Externally Bonded Fabric-Reinforced Cementitious Matrix (FRCM) Systems for / 2013
• 549.5R-16 Report on Spray-up and Continuous Strand Glass Fiber Reinforced Concrete (GFRC) / 2016
• 549R-97: Report on Ferrocement (Reapproved 2009) / 1997
• 550.1R-09: Guide to Emulating Cast-in-Place Detailing for Seismic Design of Precast Concrete Structures / 2009
• ACI 550.1R-09: Guide to Emulating Cast-in-Place Detailing for Seismic Design of Precast Concrete Structures (Reapproved 2017) / 2009
• 550.2R-13 Design Guide for Connections in Precast Jointed Systems / 2013
• 550.3-13 Design Specification for Unbonded Post-Tensioned Precast Concrete Special Moment Frames Satisfying ACI 374.1 / 2013
• 550.3M-13 Metric Design Specification for Unbonded Post-Tensioned Precast Concrete Special Moment Frames Satisfying ACI / 2014
• 550.4-18: Qualification of Precast Concrete Diaphragm Connections and Reinforcement at Joints for Earthquake Loading (ACI 550.4-18) and Commentary (550.4R-18) 2018 / 2018
• 550.5-18: Code Requirements for the Design of Precast Concrete Diaphragms for Earthquake Motions (ACI 550.5-18) and Commentary (ACI 550.5R-18) 2018 / 2018
• 550.5M-18: Code Requirements for the Design of Precast Concrete Diaphragms for Earthquake Motions (Metric) 2018 / 2018
• 551.1R-14: Guide to Tilt-Up Concrete Construction / 2014
• 551.2R-15 Guide for the Design of Tilt-Up Concrete Panels / 2015
• 555R-01: Removal and Reuse of Hardened Concrete / 2001
• 560R-16 Report on Design and Construction with Insulating Concrete Forms / 2016
• 562-16 Code Requirements for Assessment, Repair, and Rehabilitation of Existing Concrete Structures and Commentary / 2016
• 562M-13 Metric Code Requirements for Evaluation, Repair, and Rehabilitation of Conc. Bldgs. (ACI 562-13) & Commentary / 2013
• 562M-16 Code Requirements for Assessment, Repair, and Rehabilitation of Existing Concrete Structures and Commentary (Metric) / 2016
• CCS-0(16) Concrete Fundamentals / 2016
• CCS-0S(16) Concrete Fundamentals - Spanish Language Version / 2016
• CCS-5(16) Placing and Finishing Decorative Concrete Flatwork / 2016
• CT-16: ACI Concrete Terminology - An ACI Standard / 2016
• E-1(16) Aggregates for Concrete / 2016
• E2-00: Reinforcement for Concrete / 2000
• E3-13: Cementitious Materials for Concrete / 2013
• E4-12 Chemical Admixtures for Concrete / 2012
• Guide to the Code for Evaluation, Repair, and Rehabilitation of Concrete Buildings / 2015
• ITG-4.1-07 Specification for High-Strength Concrete in Moderate to High Seismic Applications / 2007
• ITG-4.2R-06 Materials and Quality Considerations for High-Strength Concrete in Moderate to High Seismic Applications / 2006
• ITG-4.3R-07 Report on Structural Design & Detailing for High Strength Concrete in Moderate to High Seismic Applications / 2007
• ITG-5.1-07 Acceptance Criteria for Special Unbonded Post-Tensioned Precast Structural Walls Based on Validation Testing / 2008
• ITG-5.1M-07 Metric Acceptance Criteria for Special Unbonded Post-Tens.Precast Struct. Walls Based on Validation Testing / 2008
• ITG-5.2-09 Requirements for Design of a Special Unbonded Post-Tensioned Precast Shear Wall Satisfying ACI ITG-5.1 & Comm / 2009
• ITG-6R-10 Design Guide for the Use of ASTM A1035/A1035M Grade 100 (690) Steel Bars for Structural Concrete / 2010
• ITG-7-09 Specification for Tolerances for Precast Concrete / 2009
• ITG-7M-09 Specification for Tolerances for Precast Concrete (Metric) / 2009
• ITG-9R-16: Report on Design of Concrete Wind Turbine Towers / 2016
• ITG-10.1R-18: Report on Alternative Cements 2018 / 2018
• ACI ITG-10R-18: Practitioner\'s Guide for Alternative Cements / 2018
• MNL-3(16) Guide to the Code for Assessment, Repair, and Rehabilitation of Existing Concrete Structures / 2016
• RAP-1: Structural Crack Repair by Epoxy Injection / 2003
• RAP-1S - Structural Crack Repair by Epoxy Injection - Spanish Language / 2012
• RAP-2: Crack Repair by Gravity Feed with Resin / 2003
• RAP-2S Crack Repair by Gravity Feed with Resin - Spanish Language / 2012
• RAP-3: Spall Repair by Low-Pressure Spraying / 2003
• RAP-4: Surface Repair Using Form-and-Pour Techniques / 2003
• RAP-4S Surface Repair Using Form-and-Pour Techniques - Spanish Language / 2012
• RAP-5: Surface Repair Using Form-and-Pump Techniques / 2003
• RAP-5S Surface Repair Using Form-and-Pump Techniques - Spanish Language / 2012
• RAP-6: Vertical and Overhead Spall Repair by Hand Application / 2003
• RAP-7: Spall Repair of Horizontal Concrete Surfaces / 2005
• RAP-8: Installation of Embedded Galvanic Anodes / 2005
• RAP-9: Spall Repair by the Preplaced Aggregate Method / 2005
• RAP-10: Leveling and Reprofiling of Vertical and Overhead Surfaces / 2010
• RAP-11: Slabjacking / 2010
• RAP-12: Concrete Repair by Shotcrete Application / 2010
• RAP-13: Methacrylate Flood Coat / 2010
• RAP-14: Concrete Removal Using Hydrodemolition / 2010
• RAP3S Spall Repair by Low-Pressure Spraying - Spanish Language / 2012
• SP-1(02): Concrete Primer / 2002
• SP-2(07) Manual of Concrete Inspection / 2007
• SP-4 (8TH): Formwork for Concrete / 2014
• SP-17(14) The Reinforced Concrete Design Handbook Volumes 1 & 2 Package / 2015
• SP-17M-09: ACI Design Handbook (Metric) / 2010
• SP-17M-14: The Reinforced Concrete Design Handbook (Metric) 2018 / 2018

About ACI

Founded in 1904 and headquartered in Farmington Hills, Michigan, USA, the American Concrete Institute is a leading authority and resource worldwide for the development and distribution of consensus-based standards, technical resources, educational & training programs, certification programs, and proven expertise for individuals and organizations involved in concrete design, construction, and materials, who share a commitment to pursuing the best use of concrete. ACI has over 95 chapters, 110 student chapters, and nearly 20,000 members spanning over 120 countries.