eLibrary >
BS ISO 22514-7:2021+A1:2024 Statistical methods in process management. Capability and performance - Capability of measurement processes >
BS ISO 22514-7:2021+A1:2024 Statistical methods in process management. Capability and performance - Capability of measurement processes, 2024
- undefined
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Symbols and abbreviated terms
- 4.1 Symbols
- 4.2 Abbreviated terms
- 5 Basic principles
- 5.1 General
- 5.2 Resolution
- 5.3 Maximum permissible error known and used
- 5.3.1 General
- 5.3.2 MPE, maximum permissible deviation of the measuring system — uMPE
- 5.4 Capability and performance limits for a measuring system and measurement process
- 6 Implementation
- 6.1 General
- 6.2 Factors that influence the measurement process
- 6.2.1 General
- 6.2.2 Uncertainty components that belong to the measuring system
- 6.2.3 Additional uncertainty components belonging to the measurement process
- 7 Studies for calculating the uncertainty components
- 7.1 Measuring system
- 7.1.1 General
- 7.1.2 Repeatability and bias based on one reference standard
- 7.1.3 Standard uncertainty from the linearity deviation — uLIN
- 8 Calculation of combined uncertainty
- 8.1 General
- 8.2 Calculation of expanded uncertainty
- 9 Capability
- 9.1 Performance ratios
- 9.1.1 General
- 9.1.2 Performance ratio of the measuring system
- 9.1.3 Performance ratio of the measurement process
- 9.2 Capability indices
- 9.3 Capability of a measurement process with one-sided specifications
- 10 Capability of the measurement process compared to the capability of the production process
- 10.1 Relation between observed process capability and measurement capability ratios
- 10.2 Relation between observed process capability and measurement capability
- 11 Ongoing review of the measurement process stability
- 11.1 Ongoing review of the stability
- 12 Capability of attribute measurement processes
- 12.1 General
- 12.2 Capability calculations without using reference values
- 12.3 Capability calculations using reference values
- 12.3.1 Calculation of the uncertainty range
- 12.3.2 Symbols
- 12.3.3 Working steps for determining the uncertainty range
- 12.4 Ongoing review
- Annex A (informative) Examples
- Annex B (informative) Statistical methods used
- Bibliography [Go to Page]