ASTM D4778-94(1999)e1
Historical Standard: ASTM D4778-94(1999)e1 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions
SUPERSEDED (see Active link, below)
ASTM D4778
1. Scope
1.1 This test method provides directions for fabricating and operating a test apparatus to simultaneously monitor the corrosion and fouling tendency of real and pilot cooling water systems under heat transfer conditions.
1.2 Interpretation of the results of this test method must be left to the investigator. Many variables are involved which may not be easily controlled or fully understood. Variations in design and operating conditions may produce results that are not comparable from unit to unit.
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D1129 Terminology Relating to Water
D2331 Practices for Preparation and Preliminary Testing of Water-Formed Deposits
D2777 Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
G1 Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
G16 Guide for Applying Statistics to Analysis of Corrosion Data
Keywords
cooling water; corrosion; deposits; fouling; heat transfer; Precipitates; Water corrosivity; Weight loss; Biomass; Condenser and heat exchanger systems; Contamination--water; Cooling systems; Corrosivity--water; Deposit weight; Flow and flow rate--water; Fouling tendency; Heat flux; Heat transfer; Inlet water; Metallurgical materials/applications; Metal weight loss; Particulate matter content--water; Pilot cooling water;
ICS Code
ICS Number Code 13.060.60 (Examination of water for physical properties)
DOI: 10.1520/D4778-94R99E01
ASTM International is a member of CrossRef.
