1. Scope

1.1 This specification covers a group of general requirements that, unless otherwise specified in an individual specification, shall apply to the ASTM product specifications noted below.

1.2 In the case of conflict between a requirement of a product specification and a requirement of this specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or a requirement of this specification and a more stringent requirement of the purchase order, the purchase order shall prevail.

1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units apply unless the M designation (SI) of the product specification is specified in the order.

Note 1The dimensionless designator NPS (nominal pipe size) is used in this standard for such traditional terms as nominal diameter, size, nominal bore, and nominal size.

1.4 The following precautionary statement pertains only to the test method portion, Section 22, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

A312/A312M Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

A333/A333M Specification for Seamless and Welded Steel Pipe for Low-Temperature Service

A335/A335M Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

A358/A358M Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

A369/A369M Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service

A370 Test Methods and Definitions for Mechanical Testing of Steel Products

A376/A376M Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service

A409/A409M Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service

A426/A426M Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service

A451/A451M Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service

A608/A608M Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures

A700 Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment

A751 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

A778 Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

A790/A790M Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

A813/A813M Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe

A814/A814M Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe

A872/A872M Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments

A928/A928M Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal

A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys

A943/A943M Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes

A949/A949M Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe

A954 Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe

A994 Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys

D3951 Practice for Commercial Packaging

E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

E213 Practice for Ultrasonic Testing of Metal Pipe and Tubing

E273 Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing

E309 Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation

E426 Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys

E570 Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products

Keywords

alloy steel pipe; austenitic stainless steel; duplex stainless steel; ferritic/austenitic stainless steel; seamless steel pipe; stainless steel pipe; steel pipe; welded steel pipe;

ICS Code

ICS Number Code 23.040.10 (Iron and steel pipes)

DOI: 10.1520/A0999_A0999M-12

ASTM International is a member of CrossRef.