ASTM F3430
Scope
1.1 This specification covers requirements, test methods, materials, and marking for closed-cell cellular polypropylene (PP), open bottom, buried chambers
of corrugated wall construction used for collection, detention, and retention of stormwater runoff. Applications include commercial, residential, agricultural, and highway drainage, including
installation under parking lots and roadways.
1.2 Chambers are produced in arch shapes with dimensions based on chamber rise, chamber span, and wall stiffness. Chambers are manufactured with integral
feet that provide base support. Perforations to enhance water flow are permitted. Chambers must meet test requirements for arch stiffness, and flattening. Chamber end caps shall be produced of
PP or polyethylene (PE) by a suitable manufacturing process provided that all other product requirements in this standard are met.
1.3 Analysis and experience have shown that the successful performance of this product depends upon the type and depth of bedding and backfill, and care in
installation. This specification includes requirements for the manufacturer to provide chamber installation instructions to the purchaser.
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are
provided for information only and are not considered standard.
1.5 This standard does not purport to address water quality issues or
hydraulic performance requirements associated with its use. It is the responsibility of the user to ensure that appropriate engineering analysis is performed to evaluate the water quality
issues and hydraulic performance requirements for each installation.
1.6 The following safety hazards caveat pertains only to the test method
portion, Section 6, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It
is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to
use.
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on
Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Keywords
ASC; arch stiffness constant; cellular plastic; chamber; closed-cell; corrugated wall; detention; drainage; end cap; exfiltration; first flush; foam; infiltration; PE; polyethylene; PP;
polypropylene; retention; stormwater; structural foam; subsurface; thermoplastic; underground;
ICS Code
ICS Number Code 23.040.05 (Pipelines and its parts for external sewage systems)
DOI: 10.1520/F3430-20