Significance and Use
This test method provides basic engineering data that may be used to determine the amount of VOC delivered to the inlet of a VOC control device. The procedure is useful for establishing the
quantity of VOC that is evolved from the coating in the flash zone or bake oven and available to be incinerated, although the same procedure can be followed when other forms of VOC abatement
are used.
The total amount of VOC removed from the process by the VOC control device is a function of the amount available as given by this test method combined with the VOC removal efficiency of the
control device.
1. Scope
1.1 This test method describes the determination of the amount of volatile organic compound (VOC) released from applied waterborne automotive coatings that is available for delivery to a VOC
control device. The determination is accomplished by measuring the weight loss of a freshly coated test panel subject to evaporation or drying and by analysis of the VOC or water content in
the coating.
1.2 This test method is applicable to the VOC released from application and baking operations after the paint has been applied in a simulation of a production process, or in an actual
production facility.
1.3 Symbols and calculations from several other methods that determine VOC: Practice D3960 , EPA 450/3-88-018 and EPA 450/3-84-019 have been incorporated into this test method. The majority
of symbols and calculations used in this test method are unique because this test method deals uniquely with differences in weight of applied paint samples that have been subject to drying,
curing or solvent addition.
Note 1Training and knowledge of the product being evaluated are essential for obtaining meaningful data from this test method. It is recommended that several
practice runs be performed, and the laboratories repeatability evaluated before performing this test on the test samples.
1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to
consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to its use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
U.S. EPA Standards
EPA450/3-84-019 Procedures for Certifying Quantity of Organic Compound Emitted by Paint, Ink, and Other Coatings
ASTM Standards
D343 Specification for 2-Ethoxyethyl Acetate (95% Grade)
D1186 Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base
D1193 Specification for Reagent Water
D1475 Test Method For Density of Liquid Coatings, Inks, and Related Products
D2369 Test Method for Volatile Content of Coatings
D2697 Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
D3960 Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
D4017 Test Method for Water in Paints and Paint Materials by Karl Fischer Method
E145 Specification for Gravity-Convection and Forced-Ventilation Ovens
E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
Keywords
abatement; VOC; waterborne; Abatement; VOC calculation; Volatile organic compounds (VOC)--paints/related coatings; Waterborne coatings;
ICS Code
ICS Number Code 43.040.60 (Bodies and body components)
DOI: 10.1520/D6266-00AR11
ASTM International is a member of CrossRef.
ASTM D6266