ASTM D2671-00
Historical Standard: ASTM D2671-00 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
SUPERSEDED (see Active link, below)
ASTM D2671
1. Scope
1.1 These test methods cover the testing of heat-shrinkable tubing used for electrical insulation. Materials used include poly(vinyl chloride), polyolefins, fluorocarbon polymers, silicone rubber, and other plastic or elastomeric compounds.
1.2 The values stated in inch-pound units are the standard except for temperature, which shall be expressed in degrees Celsius. Values stated in parentheses are for information only.
1.3 The procedures appear in the following sections:
ASTM Method Procedure Sections Reference Adhesive Peel Strength 98 to 104 Brittleness Temperature 40 D 746 Color 55 to 56 D 1535 Color Stability 57 to 62 D 1535 Conditioning 7 D 618 Copper Stability 93 Corrosion Testing 89 to 95 Dielectric Breakdown 20 to 25 D 149 Dimensions 8 to 13 D 876 Flammability 68 to 72 D 876 Fluid Resistance 63 to 67 Heat Resistance 49 to 54 Heat Shock 26 to 30 Low-Temperature Properties 36 to 43 Restricted Shrinkage 14 to 19 Selection of Test Specimens 6 Secant Modulus 81 to 84 D 882 Storage Life 31 to 35 Specific Gravity 73 to 74 D 792 Stress Modulus 85 to 88 D 412 Tensile Strength and Ultimate Elongation 44 to 48 D 412 Thermal Endurance 96 to 97 Volume Resistivity 75 to 78 D 257 Water Absorption 79 to 80 D 5701.4 This is a fire-test-response standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Sections 5 and 68.2.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
D149 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
D257 Test Methods for DC Resistance or Conductance of Insulating Materials
D412 Test Methods for Vulcanized Rubber and Thermoplastic Elastomers--Tension
D570 Test Method for Water Absorption of Plastics
D618 Practice for Conditioning Plastics for Testing
D746 Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
D792 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
D876 Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
D882 Test Method for Tensile Properties of Thin Plastic Sheeting
D1535 Practice for Specifying Color by the Munsell System
D1711 Terminology Relating to Electrical Insulation
D3418 Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
E176 Terminology of Fire Standards
Keywords
adhesive peel strength; brittleness temperature; color; color stability; copper corrosion; dielectric breakdown voltage; dielectric strength; flame resistance; fluid resistance; fungus resistance; heat resistance; heat shock; heat shrinkable tubing; inside diameter; length; low temperature; melting point; restricted shrinkage; secant modulus; specific gravity; storage life; stress modulus; temperature index; tensile strength; test methods; thermal endurance; thermal endurance graph; tubing; heat-shrinkable; ultimate elongation; volume resistivity; wall concentricity; wall thickness; water absorption; Color--electrical materials/applications; Color stability; Corrosivity; Diameter--electrical materials/applications; Dielectric breakdown voltage; Dimensions; Eccentricity; Elastomeric materials/applications; Electrical insulating plastics; Electrical insulating rubber; Elongation--electrical insulating materials; Fire testing--electrical insulating materials; Flammability--electrical insulating materials; Poly(vinyl chloride)(PVC) electrical insulation; Fungal influence/resistance; Heating tests--electrical insulating materials; Heat resistance; Shelf life; Heat-shrinkable tubing (electrical insulating); Ignition--electrical insulating materials; Shrinkage; Silicone--electrical insulating materials; Solvent resistance; Temperature tests--electrical insulation; Tensile properties/testing--electrical insulating materials; Thermal endurance--electrical insulating materials; Thickness--electrical insulating materials; Tubes (electrical insulating);
ICS Code
ICS Number Code 29.120.99 (Other electrical accessories)
DOI: 10.1520/D2671-00
ASTM International is a member of CrossRef.