ASTM C1480/C1480M-07
Historical Standard: ASTM C1480/C1480M-07 Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
SUPERSEDED (see Active link, below)
ASTM C1480 / C1480M
1. Scope
1.1 This specification covers laboratory performance standards for pre-blended, dry, packaged, combined materials for use in wet or dry shotcrete applications that are delivered to a purchaser with the ingredients uniformly mixed. The use of supplemental materials, placement, curing, or protection of the shotcrete after delivery to the purchaser is not addressed by this specification.
1.2 The values stated in either SI units or inch-pound units shall be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.
The following safety hazards caveat pertains only to the test method portion of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
ASTM Standards
C78 Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
C150 Specification for Portland Cement
C387/C387M Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
C595 Specification for Blended Hydraulic Cements
C1012 Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
C1140 Practice for Preparing and Testing Specimens from Shotcrete Test Panels
C1157 Performance Specification for Hydraulic Cement
C1202 Test Method for Electrical Indication of Concretes Ability to Resist Chloride Ion Penetration
C1385/C1385M Practice for Sampling Materials for Shotcrete
C1399 Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
C1436 Specification for Materials for Shotcrete
National Institute of Standards and Technology
Handbook44 Specifications, Tolerances, and Other Technical Requirements for Commercial Weighing Devices Available from National Institute of Standards and Technology (NIST), Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402Keywords
average residual strength; compressive strength; dry mix shotcrete; flexural strength; packaged shotcrete materials; pre-blended shotcrete materials; shotcrete; wet mix shotcrete;
ICS Code
ICS Number Code 91.100.30 (Concrete and concrete products)
DOI: 10.1520/C1480_C1480M-07
ASTM International is a member of CrossRef.