|
-
ASTM
A888-23 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications (Redline)
Edition: 2023
$156.00
Unlimited Users per year
Description of ASTM-A888 2023
ASTM A888-23
Redline Standard: Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
ASTM A888
Scope
1.1 This specification covers hubless cast iron soil pipe and fittings for use in gravity flow applications. It establishes standards covering material,
manufacture, mechanical and chemical properties, dimensions, coating, test methods, inspection, certification, and product marking for hubless cast iron soil pipe and fittings. These pipe and
fittings are intended for non-pressure applications, as the selection of the proper size for sanitary drain, waste, vent, and storm drain systems allows free air space for gravity drainage.
1.2 The EDP/ASA numbers indicated in this section represent a Uniform Industry Code adopted by the American Supply Association (ASA). A group designation
prefix, 022, is assigned to hubless products, followed by the four-digit identification assigned to individual items and a check digit. This system has been instituted to facilitate EDP control
through distribution channels, and is to be used universally in ordering and specifying product items. Those items with no EDP numbers are either new, special, or transitory and will be
assigned numbers on subsequent prints of this specification.
1.3 This specification covers pipe and fittings of the following patterns and applies to any other patterns that conform with the dimensions found in
Tables 1 and 2 and all other applicable requirements given in this specification.
1.3.1 Lengths:
|
Figures
|
EDP/ASA Identification Numbers
for Hubless Pipe
|
Fig. 1
|
10 ft (3.0 m) in sizes and 5 ft. (1.5 m)
11/2 , 2, 3, 4, 5, 6, 8,
10, 12, and 15 in.
|
Fig. 1, Fig. 2
|
Method of Specifying Fittings
|
Fig. 3
|
1.3.2 Fittings:
Quarter Bend
|
Fig. 5
|
Quarter Bend, Reducing
|
Fig. 6
|
Quarter Bend, with Side Opening
|
Fig. 7
|
Quarter Bend, with Heel Opening
|
Fig. 8
|
Quarter Bend, Tapped
|
Fig. 9
|
Quarter Bend, Double
|
Fig. 10
|
Quarter Bend, Long
|
Fig. 11
|
Short Sweep
|
Fig. 12
|
Long Sweep
|
Fig. 13
|
Long Sweep, Reducing
|
Fig. 14
|
Fifth Bend
|
Fig. 15
|
Sixth Bend
|
Fig. 16
|
Eighth Bend
|
Fig. 17
|
Eighth Bend, Long
|
Fig. 18
|
Sixteenth Bend
|
Fig. 19
|
Sanitary Tee
|
Fig. 20
|
Sanitary Tee with Side Opening
|
Fig. 21
|
Sanitary Tee with 2 in. Side Opening R or L/R and L
|
Fig. 22
|
Sanitary Tee, New Orleans Special with Side Opening
|
Fig. 23
|
Sanitary Tee with 45° Side Openings and New Orleans
|
Fig. 24
|
Sanitary Special Tee Tapped
|
Fig. 25
|
Sanitary Tapped Tee, Horizontal Twin
|
Fig. 26
|
Sanitary Tapped Tee, Double Vertical
|
Fig. 27
|
Y Branch
|
Fig. 28
|
Y Branch, Double
|
Fig. 29
|
Y Branch, Upright
|
Fig. 30
|
Upright Y Wide Center Florida Special
|
Fig. 31
|
Y Branch, Combination 1/8 Bend
|
Fig. 32
|
Y Branch, Combination 1/8 Bend Double
|
Fig. 33
|
Sanitary Cross
|
Fig. 34
|
Sanitary Cross with Side Opening
|
Fig. 35
|
Sanitary Cross, New Orleans, with Side Openings
|
Fig. 36
|
Sanitary Cross, New Orleans, with 45° Special and
 Regular Side Openings
|
Fig. 37
|
Sanitary Cross, Tapped
|
Fig. 38
|
Test Tee
|
Fig. 39
|
Tapped Extension Piece
|
Fig. 40
|
Increaser-Reducer
|
Fig. 41
|
Increaser-Reducer, Short
|
Fig. 42
|
Tapped Adapter
|
Fig. 43
|
Blind Plug
|
Fig. 44
|
Iron Body Cleanout, Tapped
|
Fig. 45
|
P Trap
|
Fig. 46
|
P Trap, Long
|
Fig. 47
|
P Trap, Deep Seal
|
Fig. 48
|
P Trap, with Primer
|
Fig. 49
|
P Trap, with Tapped Inlet
|
Fig. 50
|
Tapped Inlet, Double
|
Fig. 51
|
Modified Combination Wye and 1/8 Bend, Double
|
Fig. 52
|
Modified Combination Wye and 1/8 Bend, Double, Extended
|
Fig. 53
|
Two-Way Cleanout
|
Fig. 54
|
Twin Cleanout
|
Fig. 55
|
Closet Bend, Regular and Reducing
|
Fig. 56
|
Closet Flange Riser
|
Fig. 57
|
Tapping Bosses
|
Fig. 58
|
Double Sweep Sanitary Tee (Extended)
|
Fig. 59
|
Running Trap with Double Vents
|
Fig. 60
|
P Trap with Tapped or Hubless Side Inlet
|
Fig. 61
|
Vented Tub Wye Extended, Double
|
Fig. 62
|
Vented Tub Wye Extended Offset, Left or Right
|
Fig. 63
|
Vented Tub Wye
|
Fig. 64
|
Double Two-Way Cleanout
|
Fig. 65
|
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are
provided for information only and are not considered standard.
1.5 The committee with jurisdiction over this standard is aware of another comparable standard published by the Cast Iron Soil Pipe Institute, CISPI 301.
Note 1: The text of this standard references notes and footnotes that provide explanatory
material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on
Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Keywords
cast iron; hubless pipe and fittings; no-hub pipe and fittings; soil pipe;
ICS Code
ICS Number Code 23.040.01 (Pipeline components in general. Pipelines)
DOI: 10.1520/A0888-23
The following editions for this book are also available...
Format |
Year |
Publisher |
Type |
Title |
|
|
|
Annual Price |
|
|
2023 |
ASTM
|
Model Standard
|
|
|
|
|
$131.04 |
Buy
|
This book also exists in the following packages...
Year |
Publisher |
Title |
|
Annual Price |
|
VAR
|
ASTM
|
|
[+]
|
$885.59 |
Buy |
|
2004 |
ASTM
|
|
|
|
2001 |
ASTM
|
|
|
|
2001 |
ASTM
|
|
|
|
2002 |
ASTM
|
|
|
|
2003 |
ASTM
|
|
|
|
2005 |
ASTM
|
|
|
|
2008 |
ASTM
|
|
|
|
1998 |
ASTM
|
|
|
|
2000 |
ASTM
|
|
|
|
2006 |
ASTM
|
|
|
|
|
|
|
|
VAR
|
ASTM
|
|
[+]
|
$3,560.85 |
Buy |
|
2000 |
ASTM
|
|
|
|
2001 |
ASTM
|
|
|
|
2002 |
ASTM
|
|
|
|
2002 |
ASTM
|
|
|
|
2005 |
ASTM
|
|
|
|
2008 |
ASTM
|
|
|
|
2000 |
ASTM
|
|
|
|
2001 |
ASTM
|
|
|
|
2002 |
ASTM
|
|
|
|
2003 |
ASTM
|
|
|
|
|
|
|
|
VAR
|
ASTM
|
|
[+]
|
$5,898.91 |
Buy |
|
2000 |
ASTM
|
|
|
|
2001 |
ASTM
|
|
|
|
2002 |
ASTM
|
|
|
|
2002 |
ASTM
|
|
|
|
2005 |
ASTM
|
|
|
|
2008 |
ASTM
|
|
|
|
2000 |
ASTM
|
|
|
|
2001 |
ASTM
|
|
|
|
2002 |
ASTM
|
|
|
|
2003 |
ASTM
|
|
|
|
|
|
|
|
Subscription Information
MADCAD.com ASTM Standards subscriptions are annual and access is unlimited concurrency based (number of people that can access the subscription at any given time) from single office location. For pricing on multiple office location ASTM Standards Subscriptions, please contact us at info@madcad.com or +1 800.798.9296.
Some features of MADCAD.com ASTM Standards Subscriptions are:
- Online access: With MADCAD.com’ s web based subscription service no downloads or installations are required. Access ASTM Standards from any browser on your computer, tablet or smart phone.
- Immediate Access: As soon as the transaction is completed, your ASTM Standards Subscription will be ready for access.
For any further information on MADCAD.com ASTM Standards Subscriptions, please contact us at info@madcad.com or +1 800.798.9296.
About ASTM
ASTM International, formerly known as the American Society for Testing and Materials (ASTM), is a globally recognized leader in the development and delivery of international voluntary consensus standards. Today, some 12,000 ASTM standards are used around the world to improve product quality, enhance safety, facilitate market access and trade, and build consumer confidence. ASTM’s leadership in international standards development is driven by the contributions of its members: more than 30,000 of the world’s top technical experts and business professionals representing 150 countries. Working in an open and transparent process and using ASTM’s advanced electronic infrastructure, ASTM members deliver the test methods, specifications, guides, and practices that support industries and governments worldwide.
|
US LOCAL CODES
US Territory Code Adoptions / Amendments
US State Code Adoptions / Amendments
GA State Enforced Codes
01 |
02 |
03 |
04 |
05 |
06 |
07 |
08 |
09 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
32 |
33 |
34 |
35 |
36 |
37 |
38 |
39 |
40 |
41 |
42 |
43 |
44 |
45 |
46 |
47 |
48 |
49 |
50 |
51 |
52 |
53 |
54 |
55 |
56 |
57 |
58 |
59 |
60 |
61 |
62 |
63 |
64 |
65 |
66 |
67 |
68 |
69 |
70 |
71 |
72 |
73 |
74 |
75 |
76 |
77 |
78 |
79 |
80 |
81 |
82 |
83 |
84 |
85 |
86 |
87 |
88 |
89 |
90 |
91 |
92 |
93 |
94 |
95 |
96 |
97 |
98 |
99 |
100 |
|