Already a subscriber?
MADCAD.com Free Trial
Sign up for a 3 day free trial to explore the MADCAD.com interface, PLUS access the
2009 International Building Code to see how it all works.
If you like to setup a quick demo, let us know at support@madcad.com
or +1 800.798.9296 and we will be happy to schedule a webinar for you.
Security check
Please login to your personal account to use this feature.
Please login to your authorized staff account to use this feature.
Are you sure you want to empty the cart?
BS 6312-2.2:1997 Connectors for analogue telecommunication interfaces - Sockets for use with plugs specified in BS 6312-1 - Particular requirements for fixed socket-outlets used in permanent wiring installations, 2005
- BRITISH STANDARD [Go to Page]
- Committees responsible for this British Standard
- Contents
- 1 Scope
- 2 References
- 3 Definitions [Go to Page]
- socket-outlet
- fixed socket-outlet
- flush mounted socket-outlet
- surface mounted socket-outlet
- panel mounted socket-outlet
- primary surge protected socket-outlet
- primary unprotected socket-outlet
- secondary socket-outlet
- accessible metal part
- intermediate metal part
- live part
- 4 Classification of fixed socket-outlets
- 5 General requirements
- 6 Testing [Go to Page]
- 6.1 A manufacturer or responsible vendor who claims conformity to this standard for any product, shall submit a representative type test specimen of that product to the relevant tests of this standard in the order specified in 6.2. The tests shall be ma
- 6.2 A total of at least nine specimens of socket-outlet, of any one type, shall be submitted to inspection and tests against the requirements of the following clauses:
- 6.3 Unless otherwise specified in this standard, the socket-outlets shall be tested (as delivered by the supplier) under the conditions specified in 4.2 of BS 6312-2.1:1994.
- 7 Construction [Go to Page]
- 7.1 The minimum size of flush socket-outlet plates constructed either of insulating material or of metal, or a combination of both, and which are intended for mounting on size UA1 boxes as specified in BS 4662, shall be 82.5 mm ° 82.5 mm.
- 7.2 Flush-mounted socket-outlets intended for mounting on size UA1 boxes as specified in BS 4662 shall have provision for two M3.5 fixing screws at centres of (60.3 ± 0.2) mm.
- 7.3 Surface mounted socket-outlets shall be provided with a box or enclosure to ensure proper seating on a flat surface, the box having a minimum of two holes for mounting which will accept No. 6 wood screws conforming to BS 1210:1963.
- 7.4 For panel mounted socket-outlets, the manufacturer/supplier shall specify the panel thickness and method of mounting. The dimensions of the panel cut-out shall be not less than those shown in Figure 1. [Go to Page]
- Panel cut-out dimensions
- 7.5 The construction of the socket-outlet shall be such that when a mating plug is withdrawn from it, the socket contacts are automatically screened by a shutter.
- 7.6 For multiple socket-outlets incorporating two or more sockets, the pitch between adjacent sockets shall be not less than 24 mm.
- 7.7 The mounting of a socket within a socket-outlet shall be such that the maximum dimension from the front face of the socket beneath the shutter to the front face of the socket-outlet immediately adjacent to the shutter is 5.5 mm.
- 8 Components [Go to Page]
- 8.1 Primary surge protected socket-outlets shall include the following components, configured as shown in Figure 2a):
- 8.2 Unprotected socket-outlets shall include the same components as those specified in 8.1, with the exception of the voltage surge protector. The circuitry shall be configured as shown in Figure 2b).
- 8.3 Secondary socket-outlets shall not include auxiliary components and shall be configured as shown in Figure 3.
- 8.4 Any PCB used for the interconnection of the components shall be based on BS EN 123000.
- 8.5 The assembled socket-outlet shall meet the requirements of this specification over the range of -10 °C to +40 °C and continue to operate correctly after being subject to the environmental conditioning detailed in A.3. [Go to Page]
- Primary socket-outlet circuit schematic
- Primary socket-outlet circuit schematic (concluded)
- Secondary socket-outlet circuit schematic
- 9 Marking [Go to Page]
- 9.1 Requirement
- 9.2 Test method
- 10 Accessibility of electrical connections [Go to Page]
- 10.1 Requirement
- 10.2 Test method
- 11 Provision for earthing and insulation of accessible metal parts [Go to Page]
- 11.1 General
- 11.2 Earthing
- 11.3 Insulation
- 11.4 Design and fixing of insulating material
- 12 Terminals [Go to Page]
- 12.1 Any earthing terminal of a socket-outlet shall be capable of connecting at least two 1.5 mm2, solid copper conductors and shall be marked with the symbolor(preferred) conforming to BS 6217:1981.
- 12.2 The method of connection of the telecommunications wiring to the socket-outlet shall be by screw-type terminals or insulation displacement terminals.
- 13 Electrical strength and insulation resistance
- 14 Mechanical strength [Go to Page]
- 14.1 Requirement
- 14.2 Test method [Go to Page]
- Test specimen
- Test apparatus (continued)
- Test apparatus (concluded)
- 14.3 Effectiveness of shutter
- 15 Resistance to heat [Go to Page]
- Method of testing shutter operating force
- (normative) Characteristics of components [Go to Page]
- (normative) Characteristics of components
- Voltage surge protector [Go to Page]
- Gas filled type"
- Semi-conductor type
- Insulation displacement terminals
- Environmental conditioning [Go to Page]